Jump to content

Log in or register to remove this advert

Husqvarna 365 special cylinder and piston


Dean Lofthouse
 Share

Recommended Posts

I am going to change the piston and cylinder on a 365 I have been given because it is scored. I,m going to change it for a 372 cylinder kit but am bothered that the inlet on the 372 might be the round one. The inlet on my 365 is the oval one.

 

Does anyone know if they are oval and do they have a source or part number so I don't end up with the wrong thing

 

I need a full piston / cylinder kit and the cylinder to crankcase gasket

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 24
  • Created
  • Last Reply

Top Posters In This Topic

I am going to change the piston and cylinder on a 365 I have been given because it is scored. I,m going to change it for a 372 cylinder kit but am bothered that the inlet on the 372 might be the round one. The inlet on my 365 is the oval one.

 

Does anyone know if they are oval and do they have a source or part number so I don't end up with the wrong thing

 

I need a full piston / cylinder kit and the cylinder to crankcase gasket

 

As long as it is a "special" and not the older plain old 365 . The special has the stronger bottom end , crank, bearings etc from a 372 . If you put a 372 top on an older 365 it might be too much for it . Just a thought .

Link to comment
Share on other sites

As long as it is a "special" and not the older plain old 365 . The special has the stronger bottom end , crank, bearings etc from a 372 . If you put a 372 top on an older 365 it might be too much for it . Just a thought .

 

Cheers Stubby, mine is the special, I have the top of it and the cylinder is only very slightly scored, I could probably get away with a light hone and a new piston, but I want it to have a little more "grunt".

Link to comment
Share on other sites

Slightly, I have 12 saws and 3 are husqys

 

I,ve got a 357, 365 and a big one with a 30 bar that I can't be bothered to look at the model number

 

They seem to be turning out some good stuff where as some of stihl's seems to be suffering IMO.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.