Jump to content

Log in or register to remove this advert

Managing Trees with Decay & Dysfunction


Recommended Posts

Log in or register to remove this advert

  • 2 weeks later...
What will be the course of action for the Hornbeam david? I'm guessing the willow will be reduced to a monolith and the Oak left as is?

 

The Hornbeam had height & weight reduction in 2010 due to the resinaceum.

 

We continue to monitor annually & give it the occasional tap with a nylon hammer as & when passing.

 

The willow is leaning significvantly away from the target of the path so could be left entirely but if oportunity arrises we will reduce it to keep it standing longer.

 

Oak will have a retrenchment phase at some point.

.

IMG_6632.jpg.e72464a1fe9e00cdace78497ace4d499.jpg

IMG_6543.jpg.20f8bb7299c437c0dc0e5c704c382974.jpg

Link to comment
Share on other sites

The oak looks like it could stand to have a little load taken off. :001_tongue: That failure altered biomechanics in a big way.

 

 

Happened about 5 years ago in very strong winds.

 

Felt like I wanted to give it some attention imediately afterwards but we had much higher priorities at the time and it has slipped down the pecking order.

 

It would happily take a reduction and has produced some epicormics on the newly exposed lower inner crown.

 

Its gone through some pretty strong winds since (last St Judes being the most significant) and had no more loss.

 

Nev Fay was suitably impressed with the failure on a stroll looking around our trees and some of their issues.

 

.

DSCF1911.jpg.2d8f0b0f42d5b4e21fa3ca5661638b1a.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.