Jump to content

Log in or register to remove this advert

Power issue with 56 plate L200


Matthew Arnold
 Share

Recommended Posts

We have noticed since monday that our truck is underpowered. We lent it to a colleague on Monday so he could go to meetings and such. When he dropped it off with us he was crashing about a bit as he came down through the heath. On speaking to our family mechanic he thinks it may be the turbo on its way out. It is very intermitent. We took it for a good run on the way home this evening just to clear out the pipes of any built up crud and we noticed that it was kicking in at around 4k rpm when it would normally kick in around 1,500 rpm. When it wasnt producing any power you could hear it sucking air but there was no PSI. Has anyone else had this problem with their L200?

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

If the turbo is on its way out there is a good chance of alot of smoke. If you arent getting that then its more likely to be something like blocked filters, or given that it is intermittent, a piece of dirt over the pick up in the tank. That will affect the rev point at which the turbo kicks in too. I would do all the cheap bits first. Change all the filters, and take the pick up pipe off the lift pump and having removed/ loosened the filler cap blow back down the fuel line with a compressor. If you have a filter in between the lift pump and the tank, blow it back from the tank side of that filter.

Turbo on a rice rocket may be cripplingly expensive.....hope its dirty fuel related mate.

Link to comment
Share on other sites

It has just been booked into the council garage for friday afternoon so they can do the checks n sort it out over the weekend. I recon dirty fuel dilters may be the first thing to check and turbo the last. I think the last thing the boss wants to do is fork out £500 for a new turbo. We had the egr valve cleaned 6 months ago as it was fouled up. Probably be worth just removing the egr valve all together as it tars/gums up the valves n inlet manifold.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.