Jump to content

Log in or register to remove this advert

husqvarna 350 spewing fuel out of intake when runniNG


cameroncrofter
 Share

Recommended Posts

Log in or register to remove this advert

What actually happens when you lean the H screw off? It just sounds like if you screwed the H screw in it would rev out properly and reduce the blow back, the H screw in the first video looks a long way out?

  • Like 1
Link to comment
Share on other sites

1 hour ago, adw said:

What actually happens when you lean the H screw off? It just sounds like if you screwed the H screw in it would rev out properly and reduce the blow back, the H screw in the first video looks a long way out?

That's what I said last night!

The standard settings are 1 turn out but if they are set to 1 1/4 turns each, the saw should run fine once the idle is adjusted. 

I have only ever had fuel vapour coming out of the carb when the carb is megga rich or the piston skirt is very worn and the pressure in the lower crankcase freeports past the sealing piston skirt back up the inlet port and out of the carb - that was a ported MS660, ran fine before modding but the squaring of the inlet port caused this issue but a new piston fixed it. It appeared the saw had been used for a lot of milling and the filter was pretty worn causing the original piston skirt to wear.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.