Jump to content

Log in or register to remove this advert

Rate a Reduction Thread


benedmonds
 Share

Recommended Posts

Log in or register to remove this advert

It’s ok but personally I don’t think it’s a great shape. Too hard on the 10 and 2 o clock areas if looking at a clock face. Not enough curve for me, the top left is higher than the centre point and bottom right sticks out too far. However that being said certainly not as bad as some you see for sure.

Link to comment
Share on other sites

Not really in to reductions, well we are but not quite like the one above, looking at the photo and from what has been said all ready i will agree with most like taken to much at 10 and 2 o,clock and bottom right is sticking out could be a better shape in my eyes but what was the man on the ground doing ?,

  • Like 1
Link to comment
Share on other sites

Looks like it should have been brought back more.

To be honest I have probably done worse. (Usually because client wants to see more of an effect) I would have taken a bit more height out to get a better shape. That bit on the right needs to go it would piss me off if I left it! 

Hard to judge without a before pic and pictures from one angle can look better or worse than another.

I would say it's acceptable but not as good as it could be.

 Mick is right in that it's a waste of time in a way. Going to be back at square one in a couple of years.

People will never agree on the results of reductions like this, everyone sees it through their own eyes. If the client was happy and paid up that's the best result you can hope for.

 

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.