Jump to content
Sign in to follow this  
s o c

Jensen stress control fuse.

Recommended Posts

Hi. We’ve just converted pto chipper to trailed and fitted new 3pin plug to tractor so won’t have to be swapping between trailer tail lights and chipper plug.

does the stress control box have its own fuse and if not, what ampage fuse should I use for new socket?

 Thanks 

 

 

Share this post


Link to post
Share on other sites

Hi my Jensen A521 old but strong, has no fuse that I know, the sensor on chipper wheel goes into the box of magic which then controls the switch on the hydrologic valve to slow the indeed wheels, did find a strange "fuse" Hiden behind the box of magic that melted, but hat was for starter motor on Harz diesel replace with a proper in line fuse. There must be a fuse on the stress power in, on my board I had to replace a diode that fell of "dry joint" (normal black and red stripe) this was powering to stress controls I think, it worked any way. But it was getting to my limitations in electronics, as hobby engineering.

Don't give up the best compliment I got in Germany was "Hobby engineer are not so Bad, because they think out of the box"

Share this post


Link to post
Share on other sites

Yes.

Other Jensen  pto we have is powered from tail lights pin on trailer plug.

15amp seems a bit strong to me , maybe there’s a lighter fuse in the box somewhere?

Share this post


Link to post
Share on other sites
2 hours ago, s o c said:

Yes.

Other Jensen  pto we have is powered from tail lights pin on trailer plug.

15amp seems a bit strong to me , maybe there’s a lighter fuse in the box somewhere?

Stick a smaller inline fuse in then, remember the fuse doesn't protect the stress control it protects the cable and gubbins upstream if something shorts in or near it.

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  •  

  • Featured Adverts

  • Tip site reviews

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.