Jump to content

Log in or register to remove this advert

Digger auxiliary supplies for rotating grab


alandurrant
 Share

Recommended Posts

11 minutes ago, alandurrant said:

Although I do NOT reccomend these people in any way at all, this one:

https://www.jbequipment.co.uk/products/bc85-excavator-forestry-grab-1-3-tonne?variant=40146432917658


Right now they owe me 3800 for a faulty flail, which is going through 'chargeback'....

 

Edit: it says ''1 to 3 ton'' - it'd make a 1.5ton digger fall over without lifting anything. Beware.

Ah, I see. I only asked as it looks a little less of a stack height than the Baltrotor GR55FF that most people, myself included, end up with on this size machine.

 

I have a pecker and compactor plate from them, they did me a good deal but thats only because Hugo in a previous life sold me a bucket for a 1.5t that was really 3 ton sized. Luckily I now have a three tonner so after five years on the shelf it's finally getting used... You're not the first on here to say that the JB grab is heavy, I'd always urge people to go Intermecatto instead.

 

I'm in the process of setting up a lighter grab/rotator combo for my E19. It handles the E27 Tigertrip 16SR5 combo well (I specced short dipper) but due to a large contract it's worth having one of it's own that hopefully will be a bit bitter matched. I've ordered a Tigergrip TG12SR5 (60kgs) from Approved Hydraulics, and one of these rotators which are a good 80mm shorter than the GR55FF that I'd otherwise be using. Will report back once it's all arrived and plumbed up.

 

WWW.EBAY.CO.UK

The rotators listed are exceptional quality.

 

  • Like 1
Link to comment
Share on other sites

Log in or register to remove this advert

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.