Jump to content

Log in or register to remove this advert

Magno-Flow magnets!?!


PeteB
 Share

Recommended Posts

I was with a client the other day, delivering 3 of our SafeTrac chippers and got introduced to John Brown of Magno-Flow. He was fitting strong magnets to the fuel system of every engine the client had in the yard. These magnets are to change the molecular structure of the fuel (petrol or diesel) which makes it burn quicker and better, improving MPG, power output and reducing emissions and noise levels.

 

I'm always sceptical of stuff like this but, I watched him do a noise measurement before and after and reduced it by 3Db, which is a huge reduction in real terms. Still sceptical,  he fitted the magnets to my Ranger and it has improved the mpg  by about 4mpg per tank and I got the feeling that I didn't have the same degree of throttle to get about.

 

I still am baffled by it and dead sceptical! If it is that good, why isn't it fitted as standard on all ICE?

 

Anyone else tried this kind of thing.

Link to comment
Share on other sites

Log in or register to remove this advert

4 minutes ago, PeteB said:

I was with a client the other day, delivering 3 of our SafeTrac chippers and got introduced to John Brown of Magno-Flow. He was fitting strong magnets to the fuel system of every engine the client had in the yard. These magnets are to change the molecular structure of the fuel (petrol or diesel) which makes it burn quicker and better, improving MPG, power output and reducing emissions and noise levels.

 

I'm always sceptical of stuff like this but, I watched him do a noise measurement before and after and reduced it by 3Db, which is a huge reduction in real terms. Still sceptical,  he fitted the magnets to my Ranger and it has improved the mpg  by about 4mpg per tank and I got the feeling that I didn't have the same degree of throttle to get about.

 

I still am baffled by it and dead sceptical! If it is that good, why isn't it fitted as standard on all ICE?

 

Anyone else tried this kind of thing.

Fitted a magnetic coil around the mains water incoming pipe at home . It supposed to rid the world of all known diseases and pick the winning lotto numbers  . Proof is in the pudding as they say .

  • Like 1
  • Haha 1
Link to comment
Share on other sites

13 minutes ago, PeteB said:

I was with a client the other day, delivering 3 of our SafeTrac chippers and got introduced to John Brown of Magno-Flow. He was fitting strong magnets to the fuel system of every engine the client had in the yard. These magnets are to change the molecular structure of the fuel (petrol or diesel) which makes it burn quicker and better, improving MPG, power output and reducing emissions and noise levels.

 

I'm always sceptical of stuff like this but, I watched him do a noise measurement before and after and reduced it by 3Db, which is a huge reduction in real terms. Still sceptical,  he fitted the magnets to my Ranger and it has improved the mpg  by about 4mpg per tank and I got the feeling that I didn't have the same degree of throttle to get about.

 

I still am baffled by it and dead sceptical! If it is that good, why isn't it fitted as standard on all ICE?

 

Anyone else tried this kind of thing.

Post some peer approved scientific papers on the subject...

Link to comment
Share on other sites

There are many psuedo-scientific articles circulating on the internet.

Many almost make for convincing reading except non are published by reputable mainstream scientific journals.

Like faith healers whose magic works in gatherings of the openly receptive, such powers evaporate in the hospital.

Likewise the power of magnets to improve fuel efficiency works for the client but seemingly not in the laboratory.

Here is Wikipedias take on it:

EN.M.WIKIPEDIA.ORG

 

  • Like 1
Link to comment
Share on other sites

I wore a magnetic bracelet for years, swore it stopped all my aches and pains and encouraged everyone to try one.

Then one day it broke, or to be precise a blob of weld spatter landed on it and melted the plastic that held the magnet in place and it became too uncomfortable to wear. No change whatsoever from not wearing it and still isn't.

 

When I took the bracelet off I hooked it over the top of the shower glass, then  when I moved house years later I was ever so surprised to see it hung over the shower glass in the new place. Missus thought that was where I kept it so brought it and put it in its proper place. :D

Link to comment
Share on other sites

9 hours ago, Peasgood said:

I wore a magnetic bracelet for years, swore it stopped all my aches and pains and encouraged everyone to try one.

Then one day it broke, or to be precise a blob of weld spatter landed on it and melted the plastic that held the magnet in place and it became too uncomfortable to wear. No change whatsoever from not wearing it and still isn't.

 

When I took the bracelet off I hooked it over the top of the shower glass, then  when I moved house years later I was ever so surprised to see it hung over the shower glass in the new place. Missus thought that was where I kept it so brought it and put it in its proper place. :D

Stops the shower head scaling up I expect 😁

Link to comment
Share on other sites

Oh god the magnet bullcrap thing.

One of my mates would go on about it and i would shut him up by saying "so the military, formula one, the aircraft industry and the entire combustion engine industry in the last 100 years has never thought to stick a few magnets on fuels lines?"

 

Yeah and they just took the world gullible out of the dictionary

Edited by Timbermcpherson
  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.