Jump to content

Log in or register to remove this advert

Bandmill rollers - where to buy?


Squaredy
 Share

Recommended Posts

I am needing to change the rollers that guide the blade on my Norwood bandmill.  I am not even bothering with a price from Norwood agents as I know they are crazy expensive.  I have in the past bought them straight from Norwood in Canada but this seems silly when they are surely an off-the shelf part and not unique to Norwood. 

 

I have tried Woodmizer and they are getting back to me to check the internal diameter, so meanwhile any other suggestions?

Link to comment
Share on other sites

Log in or register to remove this advert

4 hours ago, Squaredy said:

I am needing to change the rollers that guide the blade on my Norwood bandmill.  I am not even bothering with a price from Norwood agents as I know they are crazy expensive.  I have in the past bought them straight from Norwood in Canada but this seems silly when they are surely an off-the shelf part and not unique to Norwood. 

 

I have tried Woodmizer and they are getting back to me to check the internal diameter, so meanwhile any other suggestions?

If there are any numbers on them then maybe one of the many  bearing suppliers might be able to help .

  • Like 1
Link to comment
Share on other sites

26 minutes ago, Stubby said:

If there are any numbers on them then maybe one of the many  bearing suppliers might be able to help .

Yes but it isn't just the bearing I am after, I don't fancy trying to pull out the old bearing out so I was looking to replace the entire roller.

Link to comment
Share on other sites

Thank you @bilke_user.  Now I have to admit I don't think the bearings on my rollers will knock out so easily.  I will look again tomorrow...if they do then that is the answer, as it is certainly only the bearing that has failed.  

Link to comment
Share on other sites

Well, I pressed out the bearings this morning - so simple, just use an appropriate size socket and hold the roller on the jaws of an open vice so there is a void for the bearing to go into; and whack the socket with a hammer.  Can't believe I didn't try this years ago.  Have ordered replacement bearings online at a cost of £4 each and it takes two per roller.  Pressing them in will be a sinch so happy days and thank you for the helpful suggestions. 

 

Arbtalk comes up trumps again.

  • Like 6
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.