What to do with IBC tote inserts?

[gensetsteve]

Cut the top and bottom off . Make sure they are reasonably clean . Then fit them inside each other when they weigh 1000 kg which is a hell of a lot of plastic liners take them to a trade waste tip/recycling centre they will charge £95 per tonne and take them from you . Don’t buy ibc with nasties in them water soluable or fruit juices ad blue etc are ok 

Edited April 21, 2021 by gensetsteve

[Stubby]

1 hour ago, gensetsteve said:

Cut the top and bottom off . Make sure they are reasonably clean . Then fit them inside each other when they weigh 1000 kg which is a hell of a lot of plastic liners take them to a trade waste tip/recycling centre they will charge £95 per tonne and take them from you . Don’t buy ibc with nasties in them water soluable or fruit juices ad blue etc are ok 

No need if you cut them like I suggested . You get two lids and nothing to dispose of .

[trigger_andy]

No need if you cut them like I suggested . You get two lids and nothing to dispose of .

Think about what you’ve just wrote. 🧐

[Commando]

Think about what you’ve just wrote. 🧐

Thought it was just me Andy🤣

[Stubby]

2 hours ago, trigger_andy said:

 

 

Think about what you’ve just wrote. 🧐

 

 

You guys really don't get it do you ?  Andy . Get a cube of cheese . Lay it on the cutting board . Now place your knife on the upper most surface with the blade lined up from corner to corner . Push down cutting it in two .  Now you have two apexes , roofs , lids , whatever you want to call them and nothing else .  Now cut the IBC liner the same way .

Edited April 22, 2021 by Stubby

[gensetsteve]

I don’t need that many lids and 500 ibc tanks cut in half take up a lot of room 😄. I just cut the top 6 inches off and use that for a lid less height and less eyesore . I have started cutting the sides of the tank into 6 in strips and using this as labels on the side of the cage threaded through the bars 

[trigger_andy]

1 hour ago, Stubby said:

You guys really don't get it do you ?  Andy . Get a cube of cheese . Lay it on the cutting board . Now place your knife on the upper most surface with the blade lined up from corner to corner . Push down cutting it in two .  Now you have two apexes , roofs , lids , whatever you want to call them and nothing else .  Now cut the IBC liner the same way .

Exactly. This is exactly what we do get.

 

Now you yourself have just stated that you'll have two 'roofs' . Two roofs from each IBC Plastic Liner. So two 'Roofs' from one liner, and how many 'Roofs' does one IBC need? 

 

Think about it.   

 

 

I think outta respect for you the others are just pretending you've not been repeatedly forcing this line of reasoning.  

Edited April 22, 2021 by trigger_andy

[Khriss]

3 hours ago, Stubby said:

You guys really don't get it do you ?  Andy . Get a cube of cheese . Lay it on the cutting board . Now place your knife on the upper most surface with the blade lined up from corner to corner . Push down cutting it in two .  Now you have two apexes , roofs , lids , whatever you want to call them and nothing else .  Now cut the IBC liner the same way .

Then eat the cheese so its not wasted. K

Edited April 22, 2021 by Khriss
He doesnt get it Mr Stubby, thats exactly how i make my ponds so there is a deep bit in middle.

[trigger_andy]

Then eat the cheese so its not wasted. K

But only half the cheese. The other hand will make one roof. [emoji57]

[Stubby]

2 hours ago, trigger_andy said:

Exactly. This is exactly what we do get.

 

Now you yourself have just stated that you'll have two 'roofs' . Two roofs from each IBC Plastic Liner. So two 'Roofs' from one liner, and how many 'Roofs' does one IBC need? 

 

Think about it.   

 

 

I think outta respect for you the others are just pretending you've not been repeatedly forcing this line of reasoning.  

AND NO WASTE TO DISPOSE OF > 😁