Land rake wood grapple needed

[wozie]

Hi all looking for a land clearance rake log grapple for my tractor loader will be used for clearing the  land of brush,hawthorn,brambles etc,

they are used big time in usa over here not as much apparantly,does anyone know where to get one ?

the loader uses euro hitch

thanks all

[Commando]

Following[emoji106]

[David Harper]

52 minutes ago, wozie said:

Hi all looking for a land clearance rake log grapple for my tractor loader will be used for clearing the  land of brush,hawthorn,brambles etc,

they are used big time in usa over here not as much apparantly,does anyone know where to get one ?

the loader uses euro hitch

thanks all

Hi, We can provide this from Steel Viper Ltd. Just send me a photo of which one you like the look of and we can source one or we will manufacture one from our engineering side. contact me at [email protected]

[woody paul]

We use large muck fork design for telehandler  on loader tractor it's 7ft wide so clears a good path. 

[wozie]

Thanks everyone will look into the ideas 👍

[AndyChalmers]

I am after 1 also for a 4.5 ton digger if anyone has one or reccomend anywhere. 

[swinny]

On 13/04/2021 at 13:42, woody paul said:

We use large muck fork design for telehandler  on loader tractor it's 7ft wide so clears a good path. 

Pictures Paul

[woody paul]

Not got many pictures of it close up. It can move so stuff in one go, I had brackets mounted high so I can reach into ditches to get hold of brash.

 

[woody paul]

It's a Strimech for a John Deere 3200 telehander.

Edited April 26, 2021 by woody paul

[swinny]

There's a big strimech one at the yard but it's started bending tines and ripped a tone out of its socket recently! Where tines go through its welded only to the 6mm steel frame at the top and bottom and hollow in between. 

 

I'll try upload a pic but not sure it will be shown easily .. think its second time in from the left can just see it's not there lol 🤣 no closer photos yet. 

 

That said it is on a teleporter with way too much oil flow! Needs a restrictor for when running one of these grabs