Jump to content

Log in or register to remove this advert

Entec Rollers Grease


bolla
 Share

Recommended Posts

Hi am in the process of fitting new hydraulic infeed  motors to my entec 30 dh chipper same as timberwolf 150

am also replacing the green plastic bearing bush, the old green bush was stuck in the roller the new one is a loose fit Is this correct ?

Does the green bush need greasing and do the splines on the hydraulic motors to the rollers need greasing

If so what grease should be used

There are no grease nipples on this machine

Thanks

Link to comment
Share on other sites

Log in or register to remove this advert

Hi Bolla, I asked a similar question a few years back regarding my Entec CH25 - didn't really receive good answers but the general consensus was that any general purpose grease would do - think I ended up using LM grease as that's what I had a tin of.  My old thread is here: 

 

Link to comment
Share on other sites

19 hours ago, bolla said:

Hi am in the process of fitting new hydraulic infeed  motors to my entec 30 dh chipper same as timberwolf 150

am also replacing the green plastic bearing bush, the old green bush was stuck in the roller the new one is a loose fit Is this correct ?

Does the green bush need greasing and do the splines on the hydraulic motors to the rollers need greasing

If so what grease should be used

There are no grease nipples on this machine

Thanks

Hi.

we had one of these chippers , there were definitely grease nipples for the feed rollers.

Bush would be stuck to roller from no grease.

Any type of grease and lots of it.

we always gave a few shots every shift and bushes were still ok after 2500 hours.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.