Jump to content

Log in or register to remove this advert

E10 petrol coming in the summer,,,


Andrew L
 Share

Recommended Posts

Morning all,

Just heard that govt has announced E10 fuel to be sold from the summer.

 

WWW.GOV.UK

Learn about the benefits of E10 petrol and use our E10 compatibility checker to confirm whether your vehicle is...

 

Essentially it means that the pump fuel will have a 10% ethanol mix rather than the current 5%, which may have an impact on engine power, running and longevity.

Does anyone know if Stihl/Husqv/Echo etc have made any recommendations in regards to their 2 stroke equipment?

Maybe this is the nudge I need to go down the Aspen route,,,

 

A

Link to comment
Share on other sites

Log in or register to remove this advert

21 minutes ago, Andrew L said:

Morning all,

Just heard that govt has announced E10 fuel to be sold from the summer.

 

WWW.GOV.UK

Learn about the benefits of E10 petrol and use our E10 compatibility checker to confirm whether your vehicle is...

 

Maybe this is the nudge I need to go down the Aspen route,,,

 

A

Surely you could still just buy super unleaded and use it with a good quality 2-stroke oil.

Link to comment
Share on other sites

I can't imagine it will have that much of an effect unless you store your saw for a long time between uses. The ethanol can absorb moisture and it makes the fuel go stale sooner. It can make plastic parts harden, the clear fuel tubes are the worst, they seem to go amber/brown and then crack. Haven't seen it have much effect on rubber but I'm sure it does over time. At the end of the day new fuel lines are about £6 and a carb kit is about £15 so unless you're an occasional user who's storing fuel for long periods then it shouldn't have much of an effect. 

 

Otherwise switch to aspen

Link to comment
Share on other sites

When the unleaded 95 changes to 10% ethanol in September, some of the manufactures, namely Texaco, Esso are changing their Premium or Super Unleaded to 0% ethanol,  but not in all areas, in the areas which does not it will still be 5% ethanol as it currently is, ( even then, just to confuse the public, the fuel will be 0% ethanol, but will still show 5% ethanol on the pump to satisfy the greens! If you are in a 5% ethanol area  just use fuel stabilizer, this stops the degrading and the water absorption, its cheap and available from all good garden machinery places or the net of course. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.