Jump to content

Log in or register to remove this advert

Felling cuts in knotty wood?


DickDancer7
 Share

Recommended Posts

Anyone have any experiences/advice, putting directional felling cuts in a tree this naughty?

About 130’ tall, 6’+ wide, maybe 20deg lean towards my buddys home for the first 25’, then dog legs straight up.

removed all the big branches on the bad side as an attempt to adjust the favor(and clear the house), looks good, however i cant visualize a strong hinge in there.

Pulling is an option, tho not the greatest considering its size, and the available anchor points. 

6B672BE4-DAD8-4B63-A7C9-CE1F9A7AB8C8.jpeg

C1D863A6-9201-48DA-93F6-FE213F076F18.jpeg

  • Like 1
Link to comment
Share on other sites

Log in or register to remove this advert

Personally if it was me I would put a tag line on it anyway pretty much at the top. 125' is a LOT of leverage, it might be a heavy tree but its "balanced" when it's upright, if you have issues wedging it over etc etc it just gives you peace of mind/the ability to have a backup plan. That first photo, where is the house in relation to the tree? It looks like you have a pretty large clear area on the left of the base (downhill bit) for a humboldt? 

Edited by Paddy1000111
  • Like 2
  • Thanks 1
Link to comment
Share on other sites

Looks like you’ve weighted it away from the cabin.
Leave a slightly thicker hinge.
Make sure the back cut is level with front cut.
Knock a couple of high lifts in.
If you’re worried about barbers chairs, ratchet strap at 2’ above cut.
And cut as low as you can.
[emoji106][emoji106][emoji106]

  • Like 3
  • Thanks 2
Link to comment
Share on other sites

1 hour ago, Rough Hewn said:

Looks like you’ve weighted it away from the cabin.
Leave a slightly thicker hinge.
Make sure the back cut is level with front cut.
Knock a couple of high lifts in.
If you’re worried about barbers chairs, ratchet strap at 2’ above cut.
And cut as low as you can.
emoji106.pngemoji106.pngemoji106.png

Perfect example to test out the ultra soft Dutchman 😁

Link to comment
Share on other sites

  • Steve Bullman changed the title to Felling cuts in knotty wood?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.