Jump to content

Log in or register to remove this advert

RESIN REMOVAL AND PREVENTION


RoddyW
 Share

Recommended Posts

Hello you experienced guys out there

 

Can we get your thoughts on the topic of resin removal from guide bars and cutting blades etc?  

 

1 What's the best way to stop it building up especially when conditions are worst for it 

 

2 What's the easiest and most effective way of removing it?

Link to comment
Share on other sites

Log in or register to remove this advert

On 21/10/2020 at 11:09, Khriss said:

A sharp chain. Normally chains clean themselves, if yrs is caked its because its cutters are dulled. K

This is true . A sharp chain saves a lot of work in many respects not just fast cutting . If you have let it build up on the power head body there are brands of stuff or white spirit . Chains and guide bars will benefit from regular study .  One thing some people forget/don't know is to take out the gullets . Ok you have sharpened the cutters , taken down the rakers but eventually the gullets will be a tad wide and will rub in the kirf . Sticky spruce will cling to that .

  • Thanks 1
Link to comment
Share on other sites

44 minutes ago, nepia said:

I've never bothered actually removing sap/resin from hedgecutter blades.  I switch off at the end of use with the maximum amount of blade visible then when I get home I paint them with chain oil before putting them away.

Perfectly good.

 

 

I often hose bit of WD40 on too, BUT it depends wot yr trimming as you dont want die back from contamination. Dry blades will wear n struggle in cut.  K

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.