Jump to content

Log in or register to remove this advert

Timberwolf 125 alternator not working?


Duncan.
 Share

Recommended Posts

Hi there,

 

I have a 2016 Timberwolf 125 which only has 420 hours on it but for the last few months the battery has been losing charge.

I've been recharging the battery every few weeks but finally got round to testing it. The battery has a charge of 12.8v and doesn't go up to 14 or more when running so i checked the alternator and that was the same. Would that mean the alternator is not working?

Has anyone had this problem before and if so any remedy other than buying a new alternator as it's nearly £200 and seems far too new to have this problem really.

Any help appreciated.

 

Thanks

Duncan

Link to comment
Share on other sites

Log in or register to remove this advert

Your machines doesn't have an alternator?! Coils and regulator don't chuck up 14v straight away like an alternator due to their design. Its a slow and steady charge.

 

Something draining the system? New battery? Does it drop below 12v when running all day? I would fit a new battery first if the voltage is staying at 12.8v.

Link to comment
Share on other sites

7 hours ago, Dan Maynard said:

12v is quite flat already, I'd be concerned if it's below 12.6.

Four years is the age of my chipper battery which doesn't hold charge any more, needs replacing. Made it outside the warranty period.

The thing to check is does the voltage rise when  the engine is running? Even with a little crankshaft mounted permanent magnet charger it should get above 13.2V after running for a fair period. After a day of non use a battery should still be above 12.8V. If it falls below this when not in use there may be a phantom load discharging it. Check that by taking off a terminal and seeing if it still drops at the same rate.

  • Like 3
Link to comment
Share on other sites

2 hours ago, openspaceman said:

The thing to check is does the voltage rise when  the engine is running? Even with a little crankshaft mounted permanent magnet charger it should get above 13.2V after running for a fair period. After a day of non use a battery should still be above 12.8V. If it falls below this when not in use there may be a phantom load discharging it. Check that by taking off a terminal and seeing if it still drops at the same rate.

One of my grasscutters requires that the battery is disconnected when not in use,I gave up looking for the cause of the drain.

Link to comment
Share on other sites

Replacing the 4 year old with a brand new battery would be the first step. And with that fitted check to see if you have voltage draining overnight. Don't nick a battery off something else in the yard. The amount of over the phone diagnostics I have done over the years when the customer reports issues, they say the battery has been replaced to find out later its been "replaced" by a second hand one off another machine...

 

Get the basics right first then see where you're at.

  • Like 1
Link to comment
Share on other sites

10 hours ago, Deafhead said:

One of my grasscutters requires that the battery is disconnected when not in use,I gave up looking for the cause of the drain.

It's even more difficult on a modern car, not only do the immobilisers and alarms drain power but the ECU puts the car to sleep in stages, so you have to wait an hour or so before checking and the you mustn't disturb anything by opening doors.

 

The modern way makes a thing of the fact fuses have to have resistance to work, without resistance they wouldn't get hot enough to blow. so each different amperage fuse has a different resistance, measuring the tiniest voltage across the two little windows at the back allows you to see what current is draining via the fused circuit by looking at a table published for each fuse.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.