Jump to content

Log in or register to remove this advert

Patio stain damage (cypress)


lowlandtrees
 Share

Recommended Posts

If it is rust stains you can get stuff from Halfords to remove them. Probably worth a try anyway at this stage. 

WWW.HALFORDS.COM

Shop the latest Auto Finesse Iron Out 500ml at Halfords UK

 

Use it when we get stains from moss treating lawns with iron. Give it a squirt, brush vigorously with stiff brush wash off with lots of water. Seems to make it even worse initially but does work, try it out of sight first if you are worried.

Link to comment
Share on other sites

Log in or register to remove this advert

1 hour ago, Dan Maynard said:

I don't get how the trees can have stained the patio in the first place, have you formally acknowledged that you have caused the damage yet? This sounds a bit like the famous sawdust causing car to need a respray, in which case you say you'll need to refer to your insurers and they will most likely tell him to go away, politely.

 

Link to comment
Share on other sites

I went to see the job and offered to try to clean it later in the week. I have been working professionally in this business full time since 1978 and this is the first time I have come across this. It’s not actually the customer...she’s happy with the work. It’s the neighbour (who requested the work). He alleges that when he came back from a weekend away, that the patio was stained after we had been on site. The patio was laid 2 weeks ago.

Link to comment
Share on other sites

What is he alleging has made the staining? Sap, chain oil? It looks more like rust marking.  Do you think it was actually you that caused it? Ive seen the metal straps used to strap flags cause  rust marks. But normally in a banding pattern. What is the pattern of the staining? Is it more prominent nearer where you were working? As for a remedy, if it's natural stone, it won't be easy, as whatever it is will have absorbed,  and most detergents will stain/alter the stones natural colour

Link to comment
Share on other sites

Perhaps the problem is that the stones were not sealed yet so extra porous and therefore potentially  harder to remove stains etc .

as already said though seems more likely they are just a chancer or just assuming that the  oil marks must have came from the tree or a chainsaw .some diy shops sell similar  types of stones individually so could do a quick test trying to stain them .i bet it Would come off 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.