Jump to content

Log in or register to remove this advert

What’s the best processor to make accurate 6 inch logs


gensetsteve
 Share

Recommended Posts

The WP range has a plate to stop bad falls. With practice you can spot potential bad fallers before the happen & use the plate.

 

I did an IBC today & did some short ones to see how it did.

 

They were about 4"-8" dia & it cutting short none would fall bad unless they had odd shapes.

 

As you will not do odd shapes for kindling you wont have a problem.

 

  • Like 1
Link to comment
Share on other sites

Log in or register to remove this advert

11 hours ago, Justme said:

The WP range has a plate to stop bad falls. With practice you can spot potential bad fallers before the happen & use the plate.

 

I did an IBC today & did some short ones to see how it did.

 

They were about 4"-8" dia & it cutting short none would fall bad unless they had odd shapes.

 

As you will not do odd shapes for kindling you wont have a problem.

 

If you set it for 6 inch does it consistently cut them say 5 3/4 to 6 1/4 if that makes sense . Can you grip the last 6 inches of cord wood and cut it or is it to unstable to hold down 

Link to comment
Share on other sites

On 15/07/2020 at 08:05, gensetsteve said:

If you set it for 6 inch does it consistently cut them say 5 3/4 to 6 1/4 if that makes sense . Can you grip the last 6 inches of cord wood and cut it or is it to unstable to hold down 

I though I replied to this. 

 

Below about 8" its hard to hold down as the weight / distance sticking out is greater than whats on the bed with just 1" still holding it. You could easily extend the holder. I am not sure why I have never done so.

Link to comment
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.