Jump to content

Log in or register to remove this advert

Protecting patios etc


maybelateron
 Share

Recommended Posts

Log in or register to remove this advert

8 hours ago, Dbikeguy said:

Ladder next to the trunk, cut thin rings and pass down, will be quicker and lighter than carrying all sorts of random stuff into and out of the garden.

Then all the time gained will be lost when using the snow shovel and wheel barrow  clearing up the extra saw dust . Not to mention the extra fillups on the saw .

Edited by Stubby
Link to comment
Share on other sites

Then all the time gained will be lost when using the snow shovel and wheel barrow  clearing up the extra saw dust . Not to mention the extra fillups on the saw .
Once you've got a couple of barrows of sawdust and a few rings you've made yourself a mat anyway. Wouldn't be too bad.
Link to comment
Share on other sites

Here's my stem question, this beech had the top taken off about 10 or 15 years ago, it's 40" at the base and 30" half way up where my ladder reaches. Overall I estimate 30ft high.

There are ganoderma brackets and a big hollow sound in the middle around some old wounds, I dug down to the roots and they were soft enough to cut into with a spade. It leans. I said to the customer that I wouldn't want it near my house.

So I'm not very confident to spike up the stem and rig slices off and frankly my rigging kit isn't big enough. MEWP and drop chunks 30ft to the ground? Verge so no-one cares.

Yes that is a power line through the adjacent Holm oak.
PSX_20200623_103228.jpeg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.