Jump to content

Log in or register to remove this advert

drill bit sharpeners


carlos
 Share

Recommended Posts

The first thing we had to make in our apprenticeship was a simple drill angle gauge, the 2nd thing we learnt in our apprenticeship was how to sharpen drills.

A skill that is fairly easy to learn when shown and understood, usually I find that each side is usually only requires a couple of kisses with the grinder wheel done in a rolling action, it is usually that quick and light that very little heat is generated on the drill bit.

Definetly a valuable skill to learn.

  • Like 4
Link to comment
Share on other sites

Log in or register to remove this advert

13 hours ago, doobin said:

also two nuts give you 120 degrees. 135 degrees is a more useful angle for metal work. Most quality cobalt bits come at 135 from the factory. 

Yep, the material being cut dictates the angle, for instance brass and alloy are completely different to drill..... the other most important thing is the relevant cutting compound not to mention decent HSS bits, cheers.

  • Thanks 1
Link to comment
Share on other sites

31 minutes ago, Khriss said:

All the above. Cutting n clearance angles. Cool n lube when needed. Bought myself a rotabroach mag drill n shall marry it tomorrow ? K

Not much use for sub 12mm holes though ? or indeed for blind holes.... lathe roughing.. deep holes (oer missus

Edited by doobin
  • Like 1
Link to comment
Share on other sites

On 27/11/2019 at 07:56, carlos said:

do these work well and which ones are good as iam sick of always rooting through my drill bits looking for the least blunt ones!!

thanks carl

 

I bought a cheapy for smaller drills from screwfix and its pants, way to much slop it to accurately sharpen a drill.

 

Bob

 

:thumbdown:

 

https://media.screwfix.com/is/image//ae235?src=ae235/1566H_P&$prodImageMedium$

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.