Made a mantle for my new wood burner

[Logsnstuff]

1 hour ago, peckerwood2016 said:

£120 each

I had some fabulous 6’ pippy  oak mantles tried to get £120 must have had 50 messages to buy them and not 1 person showed up, in the end I sold 3 of them for a £100 to a guy for a small bar top just to get rid.

[trigger_andy]

16 hours ago, peckerwood2016 said:

Done some nice elm ones today all sold in 2 hours off putting them on my fb page bit of beer money

 

Lovely! What dimensions are they? What did you use to round off the edges?

[bens]

they look ace

 

that are great pieces of wood wisewood & peckerwood they make mine seem really amateur

[peckerwood2016]

All around 4ft I’ve sold loads off beams just seem to sell them every now and then that’s why I call them beer money or kid’s money ect

[carlos]

cool thread they all look nice. what sort of distance is there from the top of the stove to the under side of the mantel??? it think i may have cocked mine up with it being too close ( its not actualy in yet though)

thanks carl

[bens]

i put the mantle in at just over 500mm from the woodburner

[peckerwood2016]

The wonders off fb

[wisewood]

i put the mantle in at just over 500mm from the woodburner

Just measured mine, top of burner to lowest point of beam is 330mm.
The chimney cover plate is 420mm from top of burner.

[se7enthdevil]

this was a market i would have loved to have cracked but i never seemed to be able to do so.

 

only made one in the end.

 

i've still got some of the timber i bought for them too. nice 6x6" non pith oak but i can still use them for table legs.

[Billhook]

On 25/10/2019 at 23:29, wisewood said:

 

Had this burry oak offcut in my workshop for around 4 years. Originally milled with an alaskan then squared up with the mini mill.

Got a local joinery shop to put through their thicknesser and then got the waney edge sand blasted.

Came out lovely

 

Looks like a beautiful magic cloud of wood smoke!     Top marks!