Jump to content

Log in or register to remove this advert

Panther Interect Workbench


Rob D
 Share

Recommended Posts

Am starting to experiment using the Panther Intersect more as wood working tools rather than planking - and it works really well especially for re sawing.

 

It should be pretty easy to set things so you can slide the height up and down for the vertical side. You can see if you pinned the Panther large end brackets differently you could adjust the angle of cut.

 

 

 

  • Like 2
Link to comment
Share on other sites

Log in or register to remove this advert

On 26/09/2019 at 07:40, Rough Hewn said:

Interesting idea. Bit like a chainsaw Lucas mill.
When you mentioned changing angle of cut, could you cut a hexagon or octagonal can't?
emoji106.png

Yep I think you could cut hexagonal pretty easily - but I suppose it may be easier to make something that holds a post at a 45 degree angle and then you rotate the post in this 'holder'.

Link to comment
Share on other sites

As a carpenter and a budding table maker, this would work well with rails either side of bench with chainsaw bar just over half width of bench. Would be dead handy to flatten dried slabs after movement has occurred ie twisted. Think it would be quicker than router sled!? 

But I could be wrong ?(often am but like to try new ways)

  • Like 1
Link to comment
Share on other sites

As a carpenter and a budding table maker, this would work well with rails either side of bench with chainsaw bar just over half width of bench. Would be dead handy to flatten dried slabs after movement has occurred ie twisted. Think it would be quicker than router sled!? 
But I could be wrong [emoji6](often am but like to try new ways)
I'm in same boat as you Dave, sounds an interesting piece of kit. Cost ?
  • Like 1
Link to comment
Share on other sites

21 hours ago, harvey b davison said:
22 hours ago, Dave V said:
As a carpenter and a budding table maker, this would work well with rails either side of bench with chainsaw bar just over half width of bench. Would be dead handy to flatten dried slabs after movement has occurred ie twisted. Think it would be quicker than router sled!? 
But I could be wrong emoji6.png(often am but like to try new ways)

Read more  

I'm in same boat as you Dave, sounds an interesting piece of kit. Cost ?

What boats that no money and time but big ideas ??? 

not sure on cost but you’d need a fair few meters of rails permanently fixed to a bench to keep it dead accurate. 

Edited by Dave V
Link to comment
Share on other sites

On 28/09/2019 at 07:39, Rough Hewn said:

It's just clicked. emoji849.png(I'm slow)
Cutting table legs,skittles,turning blanks,posts etc
With a 35cc Saw emoji848.png
That's pretty clever.
Think I know a few wood workers who could do with one of those.
What's the cost of the work bench without the Saw?
emoji106.png

It's basically the Panther Intersect Mill - and that's it - not other bits required [although you would want another Panther Intersect body to do what I've done above]

 

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.