Jump to content

Log in or register to remove this advert

3.5t to 7.5t


Jimbo9
 Share

Recommended Posts

Log in or register to remove this advert

I have done both and if you are going to jump up then go 10 ton and not 7.5 as you will see a huge difference in payloads as you mention and the cost of rinning 7.5 to 10 ton in about the same and all the checks involved, I got away with having to do the HGV as my car licence allowed me to drive one,I was doing a self build at the time so if i ever got stopped the truck was used for private use and was insured on my traders policy so as i was already paying that cost nothing to add it on.

Edited by topchippyles
Link to comment
Share on other sites

9 hours ago, topchippyles said:

I have done both and if you are going to jump up then go 10 ton and not 7.5 as you will see a huge difference in payloads as you mention and the cost of rinning 7.5 to 10 ton in about the same and all the checks involved, I got away with having to do the HGV as my car licence allowed me to drive one,I was doing a self build at the time so if i ever got stopped the truck was used for private use and was insured on my traders policy so as i was already paying that cost nothing to add it on.

The thing about 10t vehicles is their scarcity. Having a quick look now there are no 10t tipper (and only one 12t tipper) within 150 miles of me. 7.5t and 18t toppers are in abundance in comparison. 

 

Easier if you are buying new but I don't have the funds, looking at decent 3 year old, 60-80k vehicles. 

  • Like 1
Link to comment
Share on other sites

I rate the 6 ton iveco's as an arb truck (especially if you have pre 97 drivers), although we have no longer have one as have moved to the 7.5 tonners.

You do get a lot of truck for the money when buying used.  

I have not done a direct cost comparison but the bigger trucks are just better designed to carry the weight

The regular checks are a pain but ensure the trucks are safe.

The MOT is MUCH more involved.

 

 

Link to comment
Share on other sites

22 minutes ago, benedmonds said:

I rate the 6 ton iveco's as an arb truck (especially if you have pre 97 drivers), although we have no longer have one as have moved to the 7.5 tonners.

You do get a lot of truck for the money when buying used.  

I have not done a direct cost comparison but the bigger trucks are just better designed to carry the weight

The regular checks are a pain but ensure the trucks are safe.

The MOT is MUCH more involved.

 

 

If your garage is doing a decent job of the regulars checks you shouldn't be getting many surprises at MOT time though, should you?

  • Like 2
Link to comment
Share on other sites

13 hours ago, Jimbo9 said:

Go on then spill the beans.. 

Sorry about my joke mate, couldn't resist.

 

I think judging on what you have said about multiple tip trips etc. you should just go for it.

 

I'm downsizing now after running an overloaded 3.5 tonner for years, but if I was on my way up rather than down I'd go down the 7.5t route no question.

The footprint of the vehicles isn't massively bigger for domestic drives etc. and as Ben says the trucks are built for the job a lot better.

 

I think the O licence thing scares people off a bit, but as someone once said it can't be that difficult because scaffolders do it!

Link to comment
Share on other sites

3 hours ago, richy_B said:

The thing about 10t vehicles is their scarcity. Having a quick look now there are no 10t tipper (and only one 12t tipper) within 150 miles of me. 7.5t and 18t toppers are in abundance in comparison. 

 

Easier if you are buying new but I don't have the funds, looking at decent 3 year old, 60-80k vehicles. 

If you do go down the 7.5 ton route them think about a roll on roll off rear bed as can leave a bin/bed on the job and still use multiple bins/beds. So handy for loading and unloading,I had one and superb for loading my 2.5 ton excavator.Cost about a grand more but what money worth spend as had 4 rear beds with it for that money.

Edited by topchippyles
Link to comment
Share on other sites

2 minutes ago, topchippyles said:

If you do go down the 7.5 ton route them think about a roll on roll off rear bed as can leave a bin on the job and still use other and so handy for loading and unloading,I had one and superb for loading my 2.5 ton excavator.Cost about a grand more but what money worth spend as had 4 rear beds with it for that.

Don't get me started! I'm like a kid with an argos catalogue in November - I need very little encouragement to buy more kit! 

  • Like 1
Link to comment
Share on other sites

33 minutes ago, Mark Bolam said:

I think the O licence thing scares people off a bit, but as someone once said it can't be that difficult because scaffolders do it!

 

What do you mean by that ? I know a few scaffolders and one of them can even write his own name.

  • Haha 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.