Jump to content

Log in or register to remove this advert

Wooden sink


gobbypunk
 Share

Recommended Posts

Hi guys I think we have had a thread about wooden sinks before but I can’t find it ,so anyway my housing association is going to refit my bathroom and if I can avoid it being just cheep white crap then all good so I want to make a wooden sink has anybody made one and if so what wood did you use and did you use resin or something else to waterproof it ,as usual looking forward to you thoughts

Thanks Mark 

Link to comment
Share on other sites

Log in or register to remove this advert

Never made one but my approach would be use a very stable wood and trust resin to do the waterproofing. Instability would cause the resin to have faults and allow water ingress into the wood.

 

Mark any chance of some pictures of those pear boards or would rather not part with them ?

Edited by Woodworks
Link to comment
Share on other sites

28 minutes ago, gobbypunk said:

Hi Steve , what timber would you recommend for a sink ,I would like to use something like  false acacia if I can find a big enough bit ,do you have anything suitable that you would be willing to part with .

i do have a large bit of catalpa that i've been holding on to for years for just such a purpose.

 

i'm going down to the container today so i'll see if there are any other large roughed out bowls that would do the job too. i know there are a couple of large walnut suckers down there but i'm not sure if they are right for the job?

 

 

5.JPG

6.JPG

8.JPG

4.JPG

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

33 minutes ago, gobbypunk said:

Hi Steve , what timber would you recommend for a sink ,I would like to use something like  false acacia if I can find a big enough bit ,do you have anything suitable that you would be willing to part with .

not sure there is a recommended timber as i've seen them made out of allsorts over the years.

 

as long as the wood is watertight it should not be a problem what you use...

Link to comment
Share on other sites

1 hour ago, gobbypunk said:

Oh sorry mate totally forgot will get it done later today,how much do you want 

Not a problem. This is what size the customer thinks we need for the finished sizes but I think they may have got there H and Ws the wrong way around  haha. As you can see it's not much but it needs to be as clean a s whistle"

16 pieces.
180mm H x 112mm W [outside edge] x 18mm timber."
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.