Jump to content
Sign in to follow this  
billpierce

Eco arborist 15 23/26 rpm?

Recommended Posts

Cant find what the running rpm should be? Manual says speed is 2300rpm . When throttle is right down it makes about 1250rpm, throttle linkage appears to be fine and has full articulation both on the lever and on throttle on engine.

 

The run button on the ECU does nothing, I know on some greenmech this will increase rpm, but don't know if this should work or is just there as it's a standard controller across models.

 

Either way it chips fine and I would say you notice it chipping slowly compared to say a tw150 etc. Just checking its revving out correctly. It's the isuzu 3Lb1 3 pot non turbo

Share this post


Link to post
Share on other sites

Hi Bill 

From memory they ran at 2400-2450 rpm , which is actually flywheel rpm.

I cant see from your pictures if the arm is actually touching the set screw at full throttle ?

If it is then I would be checking the air cleaner and fuel filter..

Jaws.

Share this post


Link to post
Share on other sites
Hi Bill 
From memory they ran at 2400-2450 rpm , which is actually flywheel rpm.
I cant see from your pictures if the arm is actually touching the set screw at full throttle ?
If it is then I would be checking the air cleaner and fuel filter..
Jaws.
Filters are a few months old and clean. Yes throttle is down on the adjust screw. Honestly it chips well and works fine. The idle rpm is about 550. Could it be the rpm sensor is goosed?

Share this post


Link to post
Share on other sites

Bill , do the revs on the display remain fairly constant at any given throttle position ?

If so I would say the sensor is ok.

The sensor gap should be 1.0 to 1.5mm .

Jase.

  • Like 1

Share this post


Link to post
Share on other sites

Bill , does it have an EHB ignition box fitted ?

That's the black ignition box with the ignition switch built into the box and idle , set and run buttons ?

It sounds like it might need re-programming.

That's a simple job over the phone and we can send you the setting info should you need to do it again in the future..

Give us a call on 01789400044..

Jase.

  • Like 1

Share this post


Link to post
Share on other sites
Bill , does it have an EHB ignition box fitted ?
That's the black ignition box with the ignition switch built into the box and idle , set and run buttons ?
It sounds like it might need re-programming.
That's a simple job over the phone and we can send you the setting info should you need to do it again in the future..
Give us a call on 01789400044..
Jase.
Cheers I'll ring Monday
  • Like 1

Share this post


Link to post
Share on other sites

All sorted, rang the workshop, went through the ECU reset. Even got the no stress working!

Many thanks, great service!

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.