Jump to content

Log in or register to remove this advert

Ms 362c help PLEASE


Terry362
 Share

Recommended Posts

Evening all. I use my 362 for firewood and some planking / milling. The other day all was fine but it wouldn’t switch off. Had to pull the spark plug in a bit of a panic!! Now I realise that I could have shorted the magneto but didn’t at the time. Looked into it a bit and think that the choke rod came out and just disappeared into a pile of sawdust somewhere. Seemed like a straight forward enough fix so ordered a new one but can’t for the life of me figure out how to fit it correctly from the switch to the valve spring. I know I could take it in to be fixed but it seemed like too simple a job to not do yourself. Can anyone send me a pic of a (working) 362 please so I can get back out and stock up for winter. Any help greatly appreciated and all piss taking completely understood. 

15A70966-AA2A-4593-B98E-39ACF3FD09E0.jpeg

  • Like 1
Link to comment
Share on other sites

Log in or register to remove this advert

The offset bend in it means it will actually move the valve spring. Will order two or three of them now and see how I get on. Thanks for all the help, looked everywhere on the internet but sometimes you need to ask the right people. And I think a little bit of my masculinity would have died if I’d taken it to the shop and explained all this, god bless the anonymity of the internet 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.