Ifor williams sides

[ostosix]

Hi there, can anybody let me know the box section that ifor trailers use for the mesh sides please? Its an LM flatbed

 

i want to make a set but ill copy the ifor ones to help keep resale value up. If anybody can nip out and measure up that would be great

[topchippyles]

Had a couple of trailers and sure its 30mm x 30mm box for the side panels.

[Matthew Storrs]

1 hour ago, ostosix said:

Hi there, can anybody let me know the box section that ifor trailers use for the mesh sides please? Its an LM flatbed

 

i want to make a set but ill copy the ifor ones to help keep resale value up. If anybody can nip out and measure up that would be great

What size trailer? I have some knocking around for a 10x6

[ostosix]

Yes 10x6 its is

[topchippyles]

Save the hassle of making them

[htb]

Job done, just to agree a price

[Sheepy]

Cost me £450 at main stealers for the mesh sides on mine, I personally couldn’t get the steel for that. Let alone get it hot dipped..

[ostosix]

13 hours ago, Sheepy said:

Cost me £450 at main stealers for the mesh sides on mine, I personally couldn’t get the steel for that. Let alone get it hot dipped..

Well ive got 25m of 30x30 box for £50, of cuts from fab shop. But 120 would be proper price id say

[Sheepy]

On 06/04/2019 at 13:36, ostosix said:

Well ive got 25m of 30x30 box for £50, of cuts from fab shop. But 120 would be proper price id say

It’s the mesh that will sting mate.

[Stihl123]

i've just brought some of this to make my own sides for the flat bed

couple of bits of unistrut and a few m10 bolts and away you go mate!!

https://www.ebay.co.uk/itm/3x-Welded-Wire-Mesh-Panels-1-2x2-4m-Galvanised-4x8ft-Steel-Sheet-Metal-2-Holes/222532516786?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649