Jump to content

Log in or register to remove this advert

Stactic cobra bracing tips?


Treeation
 Share

Recommended Posts

Hi got a project installing a static cobra bracing system for the first time in a twin stemmed macrocarpa which already has a crack but tree officer wants to retain with non-invasive bracing.

. Measured the stems with defect and going for the 8tonne system, also aware that the installation should be 2 thirds of the toal height above the defect.

 

Any tips? Especially on pre-tensioning - what is the best tool to do this?

 

Thanks in advance.

Link to comment
Share on other sites

Log in or register to remove this advert

A pair of 5ton rachet straps work well for pretensioning, or a little hand rachet winch mid tensioning line if the tree is larger. A spare friction hitch to put on the end of your bracing line so it can follow you about the tree is helpful, as are the usual tools on bits of cord, chunky scissors, insulation tape etc, and a little plywood bosuns chair/swing seat if you're going to be in a awkward spot for a bit (or like me are getting soft).

Link to comment
Share on other sites

1 hour ago, Andrew McEwan said:

A pair of 5ton rachet straps work well for pretensioning, or a little hand rachet winch mid tensioning line if the tree is larger. A spare friction hitch to put on the end of your bracing line so it can follow you about the tree is helpful, as are the usual tools on bits of cord, chunky scissors, insulation tape etc, and a little plywood bosuns chair/swing seat if you're going to be in a awkward spot for a bit (or like me are getting soft).

Thank you thats really helpful!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.