Jump to content

Log in or register to remove this advert

Today's milling


Rough Hewn

Recommended Posts

Log in or register to remove this advert

On 26/03/2021 at 09:45, arboriculturist said:

Not 'Todays Milling'  but could be tomorrows - I've been offered some Elm.

 

It's not that large but I am undecided if is worth the effort of extraction and milling. Maybe all into 3" planks and sit on them for a few years.

 

1st image is 2 sticks 3m x 18" diameter.

 

2nd image stick is 3.5m x 2ft diameter.

 

3rd image shows what the timber is like.

 

What do you think ?

 

IMG_0849.thumb.JPG.81937a34a9d8d1455b0bcb4b9ddd71c4.JPGIMG_0856.thumb.JPG.f91c1fca41bbf7b6a13d882d4ccc888b.JPG

 

 

 

 

IMG_0839.thumb.JPG.3fb3609bfe99221b354848ac295d4be0.JPG

Been offered it for free?

Link to comment
Share on other sites

some ash and syc milled recently, some nice pieces in it, plenty more to go too.

 thinking it might be worth making a solar kiln, anyone done this? I can sell dry timber all day long, less interest in green stuff. It's a long wait for a return when air drying...

also a few big spruce, all for 6x3s. Made a few raised beds out of them.

20210311_160258.jpg

20210311_100630.jpg

20210310_160543.jpg

20210310_163432.jpg

20210311_120655.jpg

20210311_100634.jpg

20210303_122024.jpg

20210311_101724.jpg

  • Like 10
Link to comment
Share on other sites

26 minutes ago, Bennovet said:

Ready to mill. Bit scary, as you only get chance.. 600x600mm at narrow end. 3880mm long. Having a go with an 076 and 36" bar on chilaskan
4" slabs..20210328_172933.jpeg20210328_172918.jpeg

Nice looking log, should get some  nice clean slabs from that. 

  • Like 1
Link to comment
Share on other sites

38 minutes ago, Bennovet said:

Ready to mill. Bit scary, as you only get chance.. 600x600mm at narrow end. 3880mm long. Having a go with an 076 and 36" bar on chilaskan
4" slabs..20210328_172933.jpeg20210328_172918.jpeg

Wish they were all like that life for a miller would be easy and  good ground 

  • Like 3
Link to comment
Share on other sites

Wish they were all like that life for a miller would be easy and  good ground 
Was hard get out and up the bank. Had to drop, unwind, and winch up a few times[emoji6]. Once on yard,lifted one side at a time and pressure washed. Then tidied ends up. This was all easy...20210311_143755.jpeg
  • Like 4
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.