Jump to content
segaiolo

help tips construction bucket rake ripper landscaping ripper for excavator

Recommended Posts

hello we will have to clear a sloping ground in the hills, we need to build a rake to clear the soil to root out roots to remove stumps to shrub bushes and rocks, you would have some suggestions thanks

we would like to use this kubota excavator and build a rake bucket by hand some suggestion some photos or drawing with project?

  • MarcaKubota
  • ModelloKx71-3
  •  
  • Anno2008

kubota 1.jpg

kubota 2.jpg

kubota 3.jpg

DSCN3512.JPG

DSCN3510.JPG

Share this post


Link to post
Share on other sites

the ground is small about 5000 square meters, you think the small excavator is sufficient, as you can see it has been abandoned for some time and there are no access roads that can be traveled by vehicles so I believe that a crawler excavator is the best solution to climb slopes and create paths truckable track, the standard bucket has small teeth to tear the soil tearing and root out roots, quarrying stumps and shrubs, you recommended. ripper plow divider?
We are cutting them by hand but for the roots we need the strength of a suitable mechanical means to choose, just small excavator?

https://youtu.be/1VxweDi6SC0

https://youtu.be/XpL1573mGXI

https://youtu.be/isKUTumubiU

https://youtu.be/ZU1Mtg6HsAk

https://youtu.be/v9WkCro2JDQ

https://youtu.be/JbL8yZfp1B0

https://youtu.be/3BiGfDoUchg

 

 

DSCN3500.JPG

DSCN3501.JPG

DSCN3503.JPG

DSCN3503.JPG

DSCN3505.JPG

DSCN3507.JPG

Share this post


Link to post
Share on other sites
8 minutes ago, john meehan said:

That’s a bit rude don’t you think?

A ripper tooth and a rake are both a good option for that I would think.

Good luck with your project.

Not really. We cannot direct him to suppliers in the uk that wont supply him

Share this post


Link to post
Share on other sites

the excavator you saw in the workshop belongs to an excavator mechanic in the area, hires it if you give me some suggestions could change a bucket or build a tool a plow or a suitable tool to do the job, the rake you mentioned costs about 1000 € uro, a costly figure for us, maybe modifying a bucket or using metal scrap recovery provided by a scrapped we can build a mechanical claw or a suitable tool, what do you think? the standard excavator bucket proved to be insufficient due to the modest potential and performance of the excavator, a tool is needed to tear and tear roots and to extract superficial stones, thanks

 

/www.tractorbynet.com/forums/build-yourself/235448-diy-ratchet-rake-2.html

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.