Jump to content

Log in or register to remove this advert

Anyone reccomend a good C.A.T scanner.


Matthew Storrs
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 20
  • Created
  • Last Reply

Top Posters In This Topic

Let us know how you get on.

 

I've wondered about the insurance get-out on this, ie

If you use a scanner but hit something, will the insurers argue that you couldn't have scanned properly.

 

It really seems we need to identify EVERYTHING down there all the time, otherwise we are screwed.

What happened when you hit the gas supply?

Link to comment
Share on other sites

41 minutes ago, Shane said:

Let us know how you get on.

 

I've wondered about the insurance get-out on this, ie

If you use a scanner but hit something, will the insurers argue that you couldn't have scanned properly.

 

It really seems we need to identify EVERYTHING down there all the time, otherwise we are screwed.

What happened when you hit the gas supply?

I paid for the gas repair myself, utilities had it fixed in an hour or two and I got a bill for £800. The funny think was the hole I drilled when I did it wasn’t even the job but just added an extra fence rail in to make good a corner! Such is life.

i asked ins if I would have been covered, they said yes as long as all precautions were taken- ie I had scanned the area and or got maps!

often moled in pipes arnt accurate on maps anyway so they should always be taken with a healthy pinch of salt.

Link to comment
Share on other sites

Hit bt and water in the same hole before, luckily the person who built the house was there and consulted after I suggested it looked in line with meter box from road. Got down to the duct, stopped and got owner and builder out. “Oh no, that’s just old gpo duct...just give it a pull” was the call. I said ok but you pay if it’s wrong, 2 minutes later the yard was full of water and teenager came out worried the internet wasn’t working!

 

Link to comment
Share on other sites

Plastic gas and water mains arnt picked up by cat scanners and older scanners dont pick up fibre optic cables 

If u feel the need to scan you should have stats from dial before you dig aswell that way you know what is registered in the visinity 

Newer cat scans can be downloaded onto a computer to prove they have been used 

And even they very latest cat scans can give plenty of false readings saying something is there so if you have the stats printed out it helps a lot 

Link to comment
Share on other sites

21 minutes ago, dent said:

Plastic gas and water mains arnt picked up by cat scanners and older scanners dont pick up fibre optic cables 

If u feel the need to scan you should have stats from dial before you dig aswell that way you know what is registered in the visinity 

Newer cat scans can be downloaded onto a computer to prove they have been used 

And even they very latest cat scans can give plenty of false readings saying something is there so if you have the stats printed out it helps a lot 

yes, false reading are common. I scanned my driveway when I wanted to get a mate in to thrust bore me a new water main and 'found' a power cable, the supply to my property comes in overhead. The only power underground here I put in from the house to the garage at the rear of the house. My mate scanned it and got a reading for power, l assured him there wasn't anything there he said if we hit anything it's a on your head which I was happy. He didn't hit anything.

Link to comment
Share on other sites

13 hours ago, Matthew Storrs said:

Think I’m right in saying you need the Genny for gas and water. And be able to put a conductor on the pipe in the first place.

 

i hit a gas last year, the area hadn’t been scanned, but wonder if it would ever pick it up anyway as the pipe had been moled in.

We used C Scope

 

Just remember it is a cable avoidance tool, it doesn't prove anything is not there.

 

As to fibre optics I'd be interested to know how it finds those.

 

It looks for electrical "noise" which can be from signals passing in a conductor, AC travelling in  a conductor or induced currents in an isolated conductor from another electrical source.

 

The ones we had had three detection settings, 50Hz, radio frequency and generator. Always best to scan on all three.

 

It won't find gas or water pipes unless they have a conductor in or buried with them, even then you would need access to one end of the conductor to inject a signal. I buried some old cable when I installed a gas supply on site.

 

The generator setting is interesting and there are two detectors in the Cscope, one above the other, so it can tell the difference in time it receives the signal  on each receiver and calculate the depth.

Link to comment
Share on other sites

9 minutes ago, openspaceman said:

We used C Scope

 

Just remember it is a cable avoidance tool, it doesn't prove anything is not there.

 

As to fibre optics I'd be interested to know how it finds those.

 

It looks for electrical "noise" which can be from signals passing in a conductor, AC travelling in  a conductor or induced currents in an isolated conductor from another electrical source.

 

The ones we had had three detection settings, 50Hz, radio frequency and generator. Always best to scan on all three.

 

It won't find gas or water pipes unless they have a conductor in or buried with them, even then you would need access to one end of the conductor to inject a signal. I buried some old cable when I installed a gas supply on site.

 

The generator setting is interesting and there are two detectors in the Cscope, one above the other, so it can tell the difference in time it receives the signal  on each receiver and calculate the depth.

Are fibre-optic cables communication cables/lines?

Link to comment
Share on other sites

6 minutes ago, openspaceman said:

Yes but I don't know  what it is that they emanate that a CAT can detect

I saw a machine a while back that could locate fibre optics but the more I think about it was'nt a cat as such. I think it was a ground penetrating radar? Although there is a radio detection cat that claims to be able to locate communication cables. I wonder if they are referring to Ethernet?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.