Jump to content

Log in or register to remove this advert

200t does it have an oil tank vent?


stewmo
 Share

Recommended Posts

Log in or register to remove this advert

Any tank that has fluid drawn from it needs a vent to allow air to replace the fluids removed. The MS200T oil tank vent is under the upper nylon chain buffer on top of the bar mount. You will need to remove the buffer, remove the oil cap and get a bit of pressure from something like an air line on the vent and a bit of WD40 or carb cleaner to shift any issue.

Link to comment
Share on other sites

9 minutes ago, spudulike said:

Any tank that has fluid drawn from it needs a vent to allow air to replace the fluids removed. The MS200T oil tank vent is under the upper nylon chain buffer on top of the bar mount. You will need to remove the buffer, remove the oil cap and get a bit of pressure from something like an air line on the vent and a bit of WD40 or carb cleaner to shift any issue.

I was close at least. ;)

Link to comment
Share on other sites

  • 2 weeks later...
On 12/07/2018 at 19:25, spudulike said:

Any tank that has fluid drawn from it needs a vent to allow air to replace the fluids removed. The MS200T oil tank vent is under the upper nylon chain buffer on top of the bar mount. You will need to remove the buffer, remove the oil cap and get a bit of pressure from something like an air line on the vent and a bit of WD40 or carb cleaner to shift any issue.

Hi Spud

 

Just for clarity do you mean some pressure to the vent from inside the oil tank or from the outside, under the chain buffer?

 

Cheers

Link to comment
Share on other sites

These vents tend to get plugged. They only operate one way so you need to use an airline on the outside of the vent to blow any shyte that could be blocking it inwards in to the tank. You can use a soft pipe over the vent to see if it is allowing air in to the tank but sealing under vacuum. 

Link to comment
Share on other sites

  • 3 weeks later...

Emptying the tank of oil and rinsing with some sort of solvent or petrol solves many  non-oiling problems! does anyone else find that chain oil can become a bit jelly-like after a while in the tank?

 

Also, more modern saws seem to be really sensitive to what chain oil you use! I have a MS201T-CM in which I use Stihl Synthplus oil - very runny. The saw runs like a dream and I have the flow set right on the E mark. At work I use an identical saw but the oil we use is a more traditional style, thick, stringy stuff. We've had no end of problems with saws non-oiling and have to have the flow on full blast just to get anything down the bar!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.