Jump to content

Log in or register to remove this advert

Opico skidster pressure query


deezyboy
 Share

Recommended Posts

Evening all

 

my skidster has a log grapple, and the grab has started to ‘slip’ when lifting heavy lumps of wood, by this I mean that the grapple opens itself when a higher pressure is put on it to clasp. 

My question is: why? It never used to do this, whatever it grabbed, it grabbed and held it.

 

it has a small couple hydraulic leaks here and there, but I do try and keep on top of keeping the oil topped up (although I don’t always succeed at this)... is it a case of that there isn’t enough oil being pumped around to deal with the pressure? Or is there a possibility that the pump is packing up?

 

cheers

Link to comment
Share on other sites

Log in or register to remove this advert

1 hour ago, deezyboy said:

Evening all

 

my skidster has a log grapple, and the grab has started to ‘slip’ when lifting heavy lumps of wood, by this I mean that the grapple opens itself when a higher pressure is put on it to clasp. 

My question is: why? It never used to do this, whatever it grabbed, it grabbed and held it.

If it grips well initially it's either the ram seal is leaking or the spool in the control worn. Most likely the ram seal.

 

An easy check, once the log is gripped, is to take the hose off the opposite (piston) side of the ram and then operate the control to grip it more, if oil comes out of the piston side the seal has gone. If the spool

1 hour ago, deezyboy said:

 

it has a small couple hydraulic leaks here and there, but I do try and keep on top of keeping the oil topped up (although I don’t always succeed at this)... is it a case of that there isn’t enough oil being pumped around to deal with the pressure? Or is there a possibility that the pump is packing up?

 

cheers

Once the spool is in neutral  the oil is locked in the ram circuit and the pump is doing no work, so if the grab relaxes without the lever being touched it cannot be a pump problem. If the engine needs to be revved hard to get it to grip with the spool open then it may well be a low pressure from a weak pump, especially if it relaxes when the spool is open and the revs drop.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.