Jump to content

Log in or register to remove this advert

greenmech 130 problem


beech tree
 Share

Recommended Posts

Hi guys,

Any help would be appreciated, I own a Greenmech Arborist 130, Honda petrol engine, I washed the chipper last sunday and haven't used the machine for a week, due to hiring in a tracked machine for jobs. Today I used it, it started up fine, but rollers wouldn't engage, after a few minutes they worked fine for 10 minutes then stopped. Knew I have no display on the RDS unit and the rollers don't work at all. Engine starts and stops fine just wont allow rollers to operate.

Many thanks for your help

Link to comment
Share on other sites

Log in or register to remove this advert

Hi,

 

remove the panel on the machine that covers the battery and feed rollers. Under there will be a couple of large round connector blocks in the main wiring harness. You have probably got water inside these. Unscrew the connectors, blow them out, pop a bit of Vaseline in there, make sure the O ring seals are present and in good condition and re assemble.

 

This will most likely fix your problem. Any issues give me a call on 07881 027599 and I can talk you through anything else.


Ash

Edited by GA Groundcare
Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.