Jump to content

Log in or register to remove this advert

Pleachers questions....


Stere
 Share

Recommended Posts

Hi being doing abit of hedge laying. Told its it bad technique when the pleachers split either down into base or up the trunk...

 

 

Alot of pictures on internet the pleachers have really long cuts on the bigger diameter stuff  so a very long hinge area which I assume reduces chance or pleacher splitting?

(Maybe where i was going wrong my cuts were shorter and @ less steep angle than picture below)

 

Looks hard to do with a handsaw billhook &  axe I assume they are  mostly done using chainsaw?

 

Or does  billhook or   axe just neet to ne razor sharp etc to get cuts the that long.

 

yorkshire.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

They live even if they do split down the stem a bit. I tend to have the length of the tongue 3x the diameter of the stem . Not cutting through the stem enough and forcing it over causes splitting too. I should add I only do Devon hedgaying which involves laying the pleacher more or less flat to the bank on which the hedge grows, so splitting is probably more commonplace. I cut the stub off to the bottom of the split if it happens.

Edited by Matthew Storrs
  • Like 1
Link to comment
Share on other sites

the longer cut means there is more support to stop splitting upwards.

If you cut down say 45 degrees and apply leverage to where the cut starts, there will be pressure on the top of the stem down to the und of the cut.

When cutting horizontal, there is none.

So some angle is beneficial to control how it splits. the above picture is excessive imo though and appears to be a typical case of style over substance as is so often the case with hedgelaying unfortunately...

Link to comment
Share on other sites

Pleachers running into the ground are ok.  Back heeling (splitting back up the pleach) is a definite no.  Pleachers will want to back heel if you leave the pleach too thick.  Get them low and get all the new growth from low down.  Doesn't matter if you use chainsaw or axe. First pic all axe work and second saw work.  Using a saw allows you to lay hedges that would be impossible to do properly with an axe.

meynell2.jpg

northants6.jpg

  • Like 4
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.