Jump to content

Log in or register to remove this advert

Husqvarna strimmer


Husqvarna strimmer
 Share

Recommended Posts

Log in or register to remove this advert

My 545RX does not have a manual one ( push/pull blue button ) but it may have an automatic one .  If yours should have a blue button and hasn't  then you wont damage it trying to run it as it won't fire as there will be no comp .

Link to comment
Share on other sites

Never seen a blanking plug look like that, most have a hex head. Stick some water and washing up fluid around the plug and pull the engine over slowly and look for bubbles around the plug. If there are none then it is good to go but if it is leaking, it will need a new one.

Long term, not having a decomp may wear the starter gear prematurely but there should be no issues running it like this if that "wood screw" looking plug is a good blanking plug and not a lashed up affair!

Link to comment
Share on other sites

Never seen a blanking plug look like that, most have a hex head. Stick some water and washing up fluid around the plug and pull the engine over slowly and look for bubbles around the plug. If there are none then it is good to go but if it is leaking, it will need a new one.
Long term, not having a decomp may wear the starter gear prematurely but there should be no issues running it like this if that "wood screw" looking plug is a good blanking plug and not a lashed up affair!

I had a flat head screw in an 075, worked fine as a blank.
My arm still aches from starting the bars***d though.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.