Jump to content

Log in or register to remove this advert

Soft wood


richardwale
 Share

Recommended Posts

2 hours ago, difflock said:

 

No kindling needed, a few handfuls of scrunched up newspaper and a few casually selected likely looking sticks, picked from those brought in for burning, i.e. 1/2 rotten, or thin section, or splintery or a hydraulic wedge split & "ruffelled" knotty Lodgepole pine.

A few minutes later with the door "snibbed" open, a roaring inferno.

 

Since there was a bit of discussion about hoth air igniters some while back I bought a £17.50 Einhell (matches the saw I was given) hot air gun. I load the fire and point the gun through the air inlet, never takes more than a minute as long as there is a bit of split pallet wood in the line of fire.

Link to comment
Share on other sites

Log in or register to remove this advert

Hush you!

I still like playing with matches.

But

Back in our barbacuing days I used a cheap hair dryer to accelerate the ignition of the charcoal.

And I always fancied a MAPP blowtorch for that application.

Some of better gasifying logwood boilers, uses a hot air gun for ignition, however one of the best designed (with respect to easy cleaned from the front flue tubes, and I have foregotten the brand, DOH!) simply uses an inbuilt  propane blowtorch, which is pure simple pragmatic genius.

mth

Edited by difflock
Link to comment
Share on other sites

3 minutes ago, flatyre said:

How well does Eucalyptus burn and is it hard or soft wood? Have loads of it in the shed but made the mistake of not splitting it immediately, like concrete:|

It's a hardwood and burns brilliantly but as you have found out, it's a pain to split when dry

Link to comment
Share on other sites

On 1/26/2018 at 09:09, Lucan said:

But are the costs per kw the same?

 

Softwood has around 75% the energy of hardwood per volume, which means from the customer's side they would be looking at 70-75% to make switching interesting. However you often see softwood only around 10-15% cheaper so is it any wonder the slow demand. I guess that is because although softwood is cheaper to produce that often doesn't match a final 25% cost reduction including delivery?

have a look at this http://www.fao.org/3/a-i4441e.pdf 
i had a discussion with a stove seller who tells all his customers never to burn softwood, which really got my goat as where we are there is no hardwood and i only supply kiln dried softwood

  • Like 2
Link to comment
Share on other sites

8 hours ago, Highlandcrofter said:

have a look at this http://www.fao.org/3/a-i4441e.pdf 
i had a discussion with a stove seller who tells all his customers never to burn softwood, which really got my goat as where we are there is no hardwood and i only supply kiln dried softwood

Maybe a free bag of softwood for this stove seller would be a good investment for you? It might make him reconsider the advice he gives...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.