Jump to content

Log in or register to remove this advert

Another 2 stroke oil thread


D.G.F.S.
 Share

Recommended Posts

Morning

 

Sorry folks, I know this or similar topics have been covered time and time again but I haven’t found an exact answer...

I run 100% Stihl kit on their HP super oil but a mate and I have just made a shocking purchase of a second hand 560xpg and t540 [emoji33]. But for what I’ve read and been told the Husky’s should to be run on the fully synthetic XP oil. So, do I get two types of oil and two fuel cans one for Stihl and one for Husky or would the Stihl HP ultra suit both saws or Husky XP oil for both?

 

Ben

Link to comment
Share on other sites

Log in or register to remove this advert

In the perfect world it would be best to use 2 cans, but that isn’t really practical. The current version of XP was produced specifically for the new 500 series engines and is the best oil to use for those saws. Keeping temperatures down is key to long life.

 

Now I’m sure it will be a similar story with stihls engines and there top spec oil. I don’t know the make up of there oil but I would assume it to be of very good quality for there engines also. So in short pick one and ensure you use good quality fuel and an accurate mix, don’t be tempted to add that bit extra oil for luck etc. If it was me I would be using the XP as I know that engine needs the best oil. 

Link to comment
Share on other sites

all my 2T kit runs on Red line Racing oil,  i mix it up at with regular pump petrol at about 40:1. 

 

I reckon it's very expensive oil and prolly works out at £24 per litre just for the oil alone but i'm hoping it's as good as they say it is.

Link to comment
Share on other sites

  • 4 years later...

JASO FD says it should be fine.

 

However, I wouldn't be one for chopping and changing oils without good reason.

 

And I wouldn't see saving somewhere in the low teens of pence per litre as good enough reason.

 

But no doubt there'll be somebody who buys the cheapest two stroke available when they need it and will never have had a problem!

 

You pays your money...............etc.

Edited by coppice cutter
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.