Jump to content

Log in or register to remove this advert

Best/Fastest seasoning of firewood


mac2
 Share

Recommended Posts

Log in or register to remove this advert

Fastest drying would be softwoods like larch a douglas IME. Fastest drying hardwoods that I can consistently get is beech. Yes it's very wet when fresh but once cut, spilt and stored in crates it loses it's moisture very quickly. Birch and sycamore both dry fast but I cant get much of either. Ash is a funny one in that it's by the far the driest fresh cut but slow to dry further. Did some tests in the past on split logs stacked in open sheds and after a year the beech was drier than the ash. As said above nothing can beat a kiln for speed.

 

If your looking to buy now and sell this winter a kiln is the only way to get properly dry logs IMO. Second best would be ash or softwood but doubt it would be properly dry this season.

 

 

  • Like 1
Link to comment
Share on other sites

15 hours ago, richardwale said:

I know already I'm going to sell all the dry wood I have, I just wish there was a simple way of building a kiln to dry 4 or 5 cube here and there to keep it ticking over. 

Any ideas on cheap easy to build kiln using workshop stove type appliance to heat the wood?.

Yes this is a case where you may be able to justify the expense and there are many ways to skin this cat: for instance how do you intend to load and unload the kiln , decrease the labour verses increase the capital cost.

 

The main thing to realise is that you need to put heat into the box to evaporate water, the more heat you put in the faster the rate of evaporation but also as you increase the heat you need to increase the fan power to circulate the heat. Three phase fans tend to be cheaper than single phase . If you only intend to use natural circulation you can measure your drying time in weeks, with high heat and circulation we managed to reduce moisture from 60% to 25% in a 24 hour loading cycle but at the expense of high capital cost.

 

If I were involved in doing this again I would still aim to process and season using natural (solar) drying  and just top up, as you intend, to maintain trade using a high temperature process but would be looking to utilise the waste heat.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.