Jump to content
Sign in to follow this  
tristan@arbcore.com

Jensen A328 PTO belt/shaft

Recommended Posts

Hi guys,

 

I need to change the belts on a Jensen A328 PTO chipper, sounds easy I know, but how on earth do you get the pto shaft off the chipper in order for me to then remove the triangle plate which exposes the belts?

 

Admittedly this is my first pto machine so I am a novice but I'm not daft and nor are my guys, we spent a morning feeling for release pins, clips, buttons, screws, a hidden chipper fairy who needed to be bribed! No luck.

 

Help us out if you can....

 

Tristan.:confused1:

Share this post


Link to post
Share on other sites

Any pictures of the machine end of the shaft

Share this post


Link to post
Share on other sites

Only a guess but try pushing the whole collar back towards the chipper while pulling the yoke back off the shaft 7967ddd992a9b5f33d4bc55d3f5316f2.jpg

 

Sent from my D5803 using Arbtalk mobile app

Share this post


Link to post
Share on other sites

Looks like an over-run clutch to me. could try searching for similar on shaft manufacturers sites.

Normally roll pin or bolt through, is the shaft on the chipper it mounts onto a normal pto spline or a plain shaft

Share this post


Link to post
Share on other sites

How To Remove PTO Overspin Clutch

 

Overrun clutch basically a one way drive. lets tractor drive chipper, but when you disengage pto on tractor it stops the chipper driving the pto, if this makes sense, only a problem with tractors having a live pto

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  •  

  • Featured Adverts

  • Tip site reviews

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.