Jump to content

Log in or register to remove this advert

Tw150 anvil problems


Doobop
 Share

Recommended Posts

Hi all I have just fitted a new anvil on my tw150 chipper but there seems to be quite a lip onto the anvil looking in through the feed bin! Which causes the brash to snag when being fed in!!

 

Help!!!

Link to comment
Share on other sites

Log in or register to remove this advert

Don't think there should be a lip. Unless you fitted it upside down[emoji12]. 2 things it could be. Is it seated down correctly, did you get any crap caught underneath it?

Or could the edge against where it sits have got worn down as well as the old anvil?

 

 

Sent from my iPhone using Arbtalk

Link to comment
Share on other sites

Bet the metal is worn in the way to the anvil. So when you fit bew anvil it appears to sit up but thats where it should be.

 

Either its been run for ages with a crap rounded anvil at some point or its ware and tare and metals worn.

 

You could try chamfer the roller box side of the anvil

Link to comment
Share on other sites

I have a similar issue with my jensen. Though it still works ok so will leave as is lol

 

The thing is you cannot weld a piece in as its only worn 2/3mm away or so? The plan for me would be to strip the machine a bit so you can get to the area. Then weld some lines on the area till complete cover of weld and built it up then use a flatting disc on grinder to smooth it a bit. All you can do id say

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.