Jump to content

Log in or register to remove this advert

40" bar for MS661?


Currie
 Share

Recommended Posts

Hi Rob D,

 

I need to pick your brains.

I'm running a 30" bar on my MS661, but am needing something bigger for ringing up a big oak stem.

 

I was thinking 36" but also see there is a 40" sugi bar. Would this work well? Should it have skip chain?

 

Thanks in advance,

Richard

Link to comment
Share on other sites

Log in or register to remove this advert

Hi Rob D,

 

I need to pick your brains.

I'm running a 30" bar on my MS661, but am needing something bigger for ringing up a big oak stem.

 

I was thinking 36" but also see there is a 40" sugi bar. Would this work well? Should it have skip chain?

 

Thanks in advance,

Richard

 

 

Yep we have 42" bars for the MS661 and we have skip link chain to go on there :thumbup1: not cheap but there you go.....

 

ST2T-3Q104-A Sugihara Pro Solid 42" 3/8 .063 132 drive links - Chainsawbars

42.jpg.889377a634abafd971009ba4b765e6be.jpg

skip.PNG.888ddc43ba07309cbc380ece85673962.PNG

Link to comment
Share on other sites

If you look next to the oil adjuster you'll see a little pin that sticks up. Push that in and you can then increase the oil flow to the very maximum. It's hidden away on page 31 of the user manual.

 

 

Good on you sir - never knew that wee gem of advice :thumbup: a godsend on longer bars and milling will have a look at my own saw.

 

 

Serves us right really as mainly we are all lazy buggers who would rather do absolutely anything than read the manual properly :blushing:

Link to comment
Share on other sites

Good on you sir - never knew that wee gem of advice :thumbup: a godsend on longer bars and milling will have a look at my own saw.

 

 

Serves us right really as mainly we are all lazy buggers who would rather do absolutely anything than read the manual properly :blushing:

 

:thumbup1:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.