Jump to content

Log in or register to remove this advert

Making oak frames from this?


spandit
 Share

Recommended Posts

A friend of mine is planning on building some hobbit houses in his field and after a large oak came down a few months ago, he's keen to use some of the timber:

 

IMG_5580.jpg

 

He's mindful that access is a bit difficult although carrying an Alaskan down there wouldn't be too hard. However, the bit on the left, whilst being about 20" in diameter and fairly straight, it has some big knots in it. Is it possible (or worthwhile) to cut the smaller bits (about 10" diameter) into curved beams freehand or should I lend him a drawknife to just remove the bark?

Link to comment
Share on other sites

Log in or register to remove this advert

It is possible to use the smaller sections to make curved beams. They will be box-heart and hence strong, but will develop cracks through to the heart (which is fine but they will show - just expect it).

 

He will need to find lengths without substantial knots and there is very much an art to this, which takes time to learn how to 'see' the timber in the tree and get the most out of it. He would then need to remove the bark and I would also remove the sapwood.

 

I would still be inclined to use an Alaskan to cut two parallel sides, then cut the other two (curved) sides using a side-axe to follow a drawn on line. You want a smooth, swept curve of equal thickness along the whole length. This will then effectively be the same construction method as standard framing, rather than roundwood framing. A 10" diameter probably has a 6" x 4" in it with slightly waney corners.

 

From the picture, I wouldn't be writing off the fatter bit either. There looks to be a reasonable length for shorter sections such as upright posts in the foreground, so again with careful mill placement it should be possible to recover some decent timber.

 

Alec

Edited by agg221
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.