Jump to content

Log in or register to remove this advert

201t fuel line re fit


Danavan
 Share

Recommended Posts

So I did the classic non mechanic thing. Had to take my 201t apart to fix a problem now I can't put it back together. Should remember from past experience to take lot's of pictures.

 

The problem is I can't find where to feed the fuel pipe from the pot back to the carb.

 

Can anyone point me in the right direction. Looked online but can't find any diagrams of what I want. :confused1::blushing:

Link to comment
Share on other sites

Log in or register to remove this advert

 

No. But thanks for the reply Jiles. Will try and get a picture up later today. I am trying to work out where on the fuel tank assembly I need to feed the fuel pipe through from the pot. Their is a hole to the left of the manifold but that is the wrong side for the pipe bends and pre molded kinks.

Link to comment
Share on other sites

No. But thanks for the reply Jiles. Will try and get a picture up later today. I am trying to work out where on the fuel tank assembly I need to feed the fuel pipe through from the pot. Their is a hole to the left of the manifold but that is the wrong side for the pipe bends and pre molded kinks.

 

I think you are mixing the fuel line and impulse line. The impulse line runs from the base of the cylinder and NOT the fuel line.

Link to comment
Share on other sites

I think you are mixing the fuel line and impulse line. The impulse line runs from the base of the cylinder and NOT the fuel line.

 

Your right spudulike! Same thing in a non mechanic mind like mine even though it isn't. Cheers for the nomuculture. Well that seals it I really am a daft sod when it comes to this stuff. Had a look at someone's saw today and it was so simple it is embarrassing!

No matter. Live and learn. Cheers again spudulike.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.