Today's Posts

Covex, the office at MDL POWER UP have printed their own (brief) paper manual, in English, if you need one. -I doubt you'd need it tho! I really can't see any chance of making clean, normal-sized chippings using this machine, sadly. I'm now looking at the more expensive G l & d chipper, with tracks -but no feed roller. 🙄

thanks. Just to be clear on the liner, it sounds like you just have a short section of metal liner poked up the chimney and then its original clay liner thereafter to the top? Is that right? A friend has a stove like that and Ive helped them clean it. It wasn't very dirty. Its old school, and no doubt the safety police will jump up and down but seems to work ok. That's my issue with modern stoves. The old ones were simple fires in a box that would cope with a wide range of flue drafts and conditions. Lots or air in/outflow would overcome any cold air in the flue very quickly. Modern ecodesign stoves need the conditions of the flue to be just right - lined the whole way to the top, flue insulation, potentially an anti-downdraft cowl to correct for the stoves inadequacies at £300+VAT. Its all great for the stove installing industry! James at Clearview has written extensively on this topic and performed some side-by-side tests: ECO DESIGN ISSUES AND FEEDBACK | Clearview Stoves WWW.CLEARVIEWSTOVES.COM

And my shirts and even my stomach got a little burn.

In a video/comment he said it was ready. I think its more that if released at the same time, no one would buy the RRP. If they wait a year, the RRP buyers can buy again.

You have made your views clear now lad on sex trafficking , no need to keep stringing it out.

Par four today no yellows. Wordle 1,607 4/6* ⬜⬜⬜⬜⬜ ⬜⬜🟩⬜🟩 ⬜⬜🟩⬜🟩 🟩🟩🟩🟩🟩

Thanks. For the esoterica! Crematoria are probably more concerned by certain "culinary" smells than formaldehide .....

I think you may of miss read my post because i am basically agreeing with you.

Cheers buddy will defo have a look around, see what there is

Did a few yesterday myself, stacked ready for chipping

Morning, rained all through the night. Taking the day off today, my backs not happy I thought I was a teenager for 2 days. So I’ll get the dog, breakfast rolls then go walk a Robo 2km job I’m starting on Friday.

battery chainsaws are good if you're in a hurry ,have 2 good batteries(preferably charged...) and the work you're doing is not too long/hours and isn't too demanding. Otherwise I'll take the gasoline 2 stroke chainsaw anytime anyday! Now, for some years am running a Makita EA6100 but I'm "itching" for either a 70cc chainsaw or even a 390 chainsaw (395 seems good for me too 🙄 ). I like heavy things

Best song for me 😎

@Johnsond without foreign citizens willing to work for sht sallary EU and UK would be in prolonged recession... BAD stuff economically speaking...

As previously mentioned, you can just undo the wire if stretching is too difficult for you.

That is not a good sign,😆 when reading this it filled me with dread knowing everyone wants to try not to pay out for more certs . But alot of it is in cpcs training. But I had the displeasure of driving a 3 ton grey thing , struggled lift 1/4 dumpy bag on a tight radius !

2025 Trump and Orban in a public meeting: "Hey Donald, Ukraine is winning the war..." 🙄

alcoohol is for weak people 😁 on 15 november I will be celebrating 10 years since I last drank alcoohol. And it wasn't beer. P.S. beer should be free! or at least massively subsidized by ALL governments(taliban included) 😎

Now at over 19,000 sites, the comparison to the previous image is noticable! 2023 2024

As above are you sure the primer is connected the right way? Its short line from (normally the top of the) carb, long line returning to the fuel tank. The fuel line goes from the fuel tank to the bottom of the carb. If the lines are clear, you should see where the bubbles start from? Are you sure the carb was assembled in the correct way? If any of the diaphragms ripped, it could benefit from a carb kit. You can pressure test a carb, but do it gently to avoid breaking stuff. You don't need a pressure tester for this, if you blow with your mouth on the fuel line you get an idea if the pressure is dropping.

@Mark_Skyland did you manage to sort the issue out?

1.5K reactions · 294 shares | when men were men. the tree industry in... WWW.FACEBOOK.COM when men were men. the tree industry in its beginnings.#treeservice #treeremoval...

Did this work yet?