Jump to content
  • entries
  • comments
  • views


Recommended Comments

Off course....cheers...it works perfectly fine for about 20 minutes and then start rolling slow til the point THAT spot.... I have checked the box where the the fusses are and there is a red light indication saying......rollers infeed fault. 


I also have overrided the anti stress mechanism..


IAM really lost for ideas....hope you can help...thanks so much. 

Share this comment

Link to comment

You could have several potential issues going on here and there is a structure to the tests you can do to find and eliminate them. Your model should have a H.Box no stress unit and this has a fault code reading sequence . I can put you in touch with a qualified Timberwolf technician who you can talk to for advice. Call me Gareth of Green Plant 01483 235111 

Share this comment

Link to comment

Glazed or even slightly slack drive belts can cause no-stress not to function as normal.

we had a 190 for 7 years, only feeding problems were belts and wiring chewed by dog

Share this comment

Link to comment

Thanks so much everyone of you guys for your support....


Hello S O C

thanks for the info... is the belt a thing that I could do it myself....is it easy or I have to take it to the garage? 


Thanks again. 

Share this comment

Link to comment


the belts should have no more than half an inch free movement if at proper tension. If they are shiny on the sides they will slip no matter how

tight they are. They are worth changing after a year or so as not expensive .

Fairly Simple to fit and tension.

your problem may well be different, the TW technician will be able to talk you through it over the phone when you have machine in front of you 

Share this comment

Link to comment

Thanks so much....Will take action to this matter... I have seen the belts and they don't look in good condition TO ME..

Thanks ever SO MUCH. 


Share this comment

Link to comment

Unless your belts are actually slipping (you should be able to hear and smell them If so) then this won't be your issue to solving the infeed issue. The pulleys will be all polished up too.


Where in the country are you. Can you take some photos of the box?


We had a TW150 in before which would feed ok for a bit then feed rollers would turn slow, reverse, forward and it would be ok for another few minutes. Turned out to be a loose pressure relief valve in the hydraulic valve block.

Share this comment

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us


Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.