Jump to content

Log in or register to remove this advert

  • bigtreedon

    Review: ECHO DCS-2500T Review

    An incredibly capable tool for all manner of tree works

    PROs:
    • Low weight
    • Well balanced
    • Oil cap design
    • Chain speed
    CONs:
    • Battery life (solved by carrying spares)
    • Can bog down in larger wood

    When Steve asked if I would like to test and review the ECHO DCS-2500T I was very honoured and couldn’t wait to get my hands on it. As a predominantly freelance climber, I carry out a range of works, from big tree removals to smaller pruning works. As a result I rely on a selection of different sized saws depending on the job in hand. After seeing the stats for this saw on paper I was intrigued to see how such a small battery saw would stand up to the rigours of our job.

    I was contacted by a helpful lady from Echo to arrange delivery of the saw. Sure enough, a couple of days later a big box arrived and I eagerly unpacked it. I have had experience using some of the other battery powered arborist saws on the market so had a preconceived idea of what to expect. What I revealed what was at first glance, a very modern and brightly coloured little saw, and smaller than anything I had previously used.
     

    Initial thoughts on the ECHO DCS-2500T

    My first reaction when picking up the ECHO DCS-2500T was how light the saw was. and the ergonomics seemed spot on, with the top handle fitting perfectly into my hand. I particularly liked the design of the side handle, how it swooped from the front of the top handle to the back of the saw…this is a great design by Echo, both ergonomically and aesthetically pleasing!

    When putting the saw together i noticed that there wasn't a sprocket in the tip of the guide bar provided. I was initially concerned that this might hamper the saws performance but it didn't seem to! I turned the oiler up to max and waited for the first opportunity to put the saw to work!
     

    First use of ECHO's battery pruning chainsaw

    The first few times the saw was put to work was on some very small pruning cuts which it performed impeccably on! The narrow kerf of the bar and small chain pitch made for some very clean cuts that would almost rival a hand pruning saw. To my surprise the battery hardly seemed to be losing any charge during these initial works. I had been going easy on it, as due to only having 1 battery I wanted to make it last as long as possible. With plenty of power still left towards the end of the day I decided to give it a try on a small silver birch removal. Nothing too taxing there, just a few small limbs to remove and then a smallish stem to section down.

     

    IMG-20200707-WA0016.jpg


    With almost a fully charged battery still, I proceeded with the removal and mostly completed it with the exception of the last few remaining sections of the stem. I was somewhat restricted in only having one battery, and quickly realised the only way to work with these saws for a full shift would be with a minimum of 2 batteries and a nearby power source to charge them in-between turns.

    Over the course of the past 10 weeks I have had the pleasure of using this saw on all manner of tree works, from pruning to removals. It never ceases to amaze me how this saw manages to chop its way through larger diameter timber. The only downside is that this does drain the power pretty fast, and a sharp saw and light hand is needed to prevent the saw from bogging down. It would generally be my recommendation to move over to a larger saw before getting to this point, and keeping the ECHO for what it is meant for.

    One of my favourite features on this saw is the patented harness clip which makes the saw perhaps one of the easiest saws to stow that I have ever had the pleasure of using. This should be a standard feature on all arborist saws!

     

    IMG-20200625-WA0005.jpg

     

    My experience with the saw as a go to small pruner and possible small tree removal tool overall is that its a joy to use. The smooth, quick chain speed and overall weight of the saw really lowers fatigue. More importantly, as any climber will tell you thats been in the game long enough, wear and tear on your limbs adds up over time. Stress on your joints is significantly reduced with this saw and using it in preference to one of the traditional petrol top handled saws(on suitable jobs), will pay dividends in the long run! In the tree it almost removes the need to use a hand saw, which again saves energy and yet more fatigue. The added benefit of not having to pull start the saw is particularly nice, especially when on the extremity of a large limb. My shoulders and elbows almost felt like they were on holiday!

    Based on all the points above I wouldn’t hesitate to recommend this saw to any professional looking for a serious replacement to their petrol powered pruning saws.
     

    Conclusion

    In closing, don’t let the size of this saw fool you. Its an incredibly capable tool for all manner of tree works, and whilst it is fundamentally a pruning saw, it is more than capable of cutting through timber with a diameter equal to its bar length when needed. This saw has really made me realise what might be achievable long term in the battery chainsaw market, and I look forward to seeing what comes next from ECHO.

    • Like 3


      Report Review

    User Feedback




    9 minutes ago, HuntingHicap said:

    My t540xp has a clip like that?

    Should have 2. A metal wire clip for the strop and a rigid plastic one to clip onto your harness.

     

    (My used T540 came with plastic one not fitted.)

    Share this comment


    Link to comment
    Share on other sites

    Yeah thats right. The metal one is what I tie the saw strop to, the plastic one is for high clipping the saw.

    Share this comment


    Link to comment
    Share on other sites

    love the Li 2500T  but i don't rate the Panther chain as it's too 'jumpy' compared to Stihl chain so i run it on an 8 inch Panther bar with stihl chain which suits my needs better.  The stihl chain holds it's edge better too. 

    Share this comment


    Link to comment
    Share on other sites

    18 hours ago, HuntingHicap said:

    My t540xp has a clip like that?

    Sorry, T540XP dose not have it. Only Echo.

    Share this comment


    Link to comment
    Share on other sites

    4 hours ago, Chonmage Boy said:

    Sorry, T540XP dose not have it. Only Echo.

    T540 has always come with a metal loop for fixing to strop and a plastic loop for high fixing .

    Edited by Stubby

    Share this comment


    Link to comment
    Share on other sites

    3 hours ago, Chonmage Boy said:

    Sorry, T540XP dose not have it. Only Echo.

    Errrrr.. yes it does. And my T525 has the same.

    Share this comment


    Link to comment
    Share on other sites

    My new 540 hasn’t got it fitted but it’s in the bag with the scrench and handbook etc. So if you want it you can put it on.

    Share this comment


    Link to comment
    Share on other sites

    I believe the Echo clip is a special stepped design which is unique, not a flat loop like other saws. That's the point, not that other saws don't have loops.

    Share this comment


    Link to comment
    Share on other sites

    5 hours ago, Moose McAlpine said:

    Errrrr.. yes it does. And my T525 has the same.

    Try unclipping it single-handedly. The point of the QuickDraw hook is it’s shape, allowing the action on virtually all belt hooks, not the fact that there is separate place for lanyard.

    Scroll to 4:00 in following video:

     

    Share this comment


    Link to comment
    Share on other sites




    Create an account or sign in to comment

    You need to be a member in order to leave a comment

    Create an account

    Sign up for a new account in our community. It's easy!

    Register a new account

    Sign in

    Already have an account? Sign in here.

    Sign In Now

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.