Jump to content

Log in or register to remove this advert

Diesel sealant


eagleye
 Share

Recommended Posts

Log in or register to remove this advert

Parallel thread, dowty seal or copper washer, no sealant.

Tapered thread, use a liquid, non hardening sealer, cant remember the number but i use a loctite product for diesel. Doesnt set so can be taken apart again. I am very weary of ptfe as it can break up when screwed together, have had hydraulic problems on a machine in the past and the velves were all jammed up with ptfe tape. I know this is on hydraulics but modern common rail diesels do not like any contaminants at all.

Hope this helps

Link to comment
Share on other sites

Parallel thread, dowty seal or copper washer, no sealant.

Tapered thread, use a liquid, non hardening sealer, cant remember the number but i use a loctite product for diesel. Doesnt set so can be taken apart again. I am very weary of ptfe as it can break up when screwed together, have had hydraulic problems on a machine in the past and the velves were all jammed up with ptfe tape. I know this is on hydraulics but modern common rail diesels do not like any contaminants at all.

Hope this helps

 

Dowty is perfect when you have a shoulder as on hydraulic fittings but not all parallell threads have suitable shoulders especially on diesel fittings. Often liquid sealers weep slightly under pressure.

If you use PTFE tape make sure you wind the correct way so that when assembling you tighten the tape. Do not go over the end of the fitting. Do NOT leave old tape on the fitting. Clean first then use new tape.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.