BG 86 blower throttle return spring

[Island Lescure]

Anyone know the part number for this or have an illustrated parts list please? I ordered one from L&S Engineering and it turned out to not be the one that I need.

 

Thank you,

 

Island

[PC Treescapes]

Hi, there are a few different carbs for these, and if you mean the throttle return spring on the primer ball side of the carb you cannot buy it on its own from stihl, you have to buy the whole carb! However Steve aka spudulike on here reworked my old spring when it went and is still going fine -much cheaper than a new carb, also apparently there may be some aftermarket springs that fit, but you would have to ask Steve. Peter

[Island Lescure]

Hi and cheers!

 

It's the BG 86 C. I have also bent the old spring so that it currently works but thought to get a new one as it is quite a pain when it goes. I will ask Steve.

[Neil-R]

Hi send me a P.M I have the correct springs here on the shelf , Pc treescapes is right Stihl don't supply the spring unless it's with a carb

 

 

Sent from my iPhone using Tapatalk

[benny6917]

Hi sorry for jumping in,but is there any chance I could order one of those throttle return springs same problem here I phoned lsenginers no go. Would be much appreciated.