Jump to content

Log in or register to remove this advert

rollers on entec problems


ms660isthebest
 Share

Recommended Posts

Hi everyone

 

I have been working with my mate today. The chipper we have been using is a entec. The problem is hydraulic oil seems to be getter warmer than normal, As a result the rollers are stopping as you feed it. The only way to get the rollers working is to put it in reverse. Could anyone help please to sort the problem out.:001_smile:

 

Cheers Carl

Link to comment
Share on other sites

Log in or register to remove this advert

Are you sure its the oil getting too hot and not lumps of chip getting lodged under the bottom roller? Unless the oil is stupidly hot it will still pump and hence turn the rollers

 

This is exactly what i'd say the problem is as well. I have the same problem with bits of wood.

Link to comment
Share on other sites

Struggling on the in feed and free rotation in the out feed can be a symptom of a collapsed roller bearing.

 

The roller grabs the casing on the in feed because of the angular profile but will reverse because the chamfer on the back allows it to ride over the casing.

Link to comment
Share on other sites

  • 2 years later...

Hi there after some advice/ parts for an entec 6" chipper

 

I am having problems with the feed rollers and beleive the problem to be the tension on the hydraulic pump belt. The aluminium pulley that it sits in looks worn as the top of the belt sits about 5mm deep inside the pully.

The mount for the hydraulic pump is ajustable and looks like it has been adjusted to its max. I am looking for a pulley either aluminium or i think they made a metal one. It is 160mm diameter.

Can I just get a belt that is slightly smaller to get the tension I need? Or do I need to get a new/second hand pulley.

I would be grateful for any advice/parts or HELP. 07818018400

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.